[TechAssist] Re: GOLDSTAR Studioworks 74i chassis CA-42
- From: Alvin Rose <ajroseca@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 01 Oct 2004 23:23:36 -0230
Hi Bil
Thanks for the reply ..Will insulate the spark gap and see what happens...
I converted My EMEM3DV to an EM7V and it works much better.
also built in a Mag Pulser too..
Alvin
Bil Green wrote:
>Hi Alvin,
>
>Remove the spark gap and use HV putty (or whatever) to insulate the
>screen voltage lead, as a test to see if the set works normally.
>How's it going with the EMEM3D#*??
>
>Bil Green
>PC 1000
>Mammoth Lakes, CA 93546
>760-924-1000
>
>Friday, October 1, 2004, 6:04:54 PM, you wrote:
>
>AR> Hi Guys
>AR> We have a Goldstar Color Monitor which has no picture..The unit is arcing
>AR> at the CRT socket from screen voltage lead to spark gap.We suspect the
>AR> flyback..any help or suggestions would be appreciated.
>AR> Radio & Tv Centre
>AR> Alvin Rose
>AR> Marystown, NL
>
>
>
>AR>
>-----------------------------------------------------------------------------
>AR> Lost Password:
>AR> http://www.tech-assist.org and select "Login Problems?".
>AR> Email Archives:
>AR> //www.freelists.org/archives/techassist/
>
>
>-----------------------------------------------------------------------------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
