This may not be your problem but you may want to look into it.I had one 2 weeks ago that had a bad vertical roll and also the osd was black.I changed the T-chip U1001 and it took care of the problem. Mando Birdie's Tv & Electronics Casa Grande, AZ John H Smit wrote: > Hello to all. > This GE TV 27GT613-CTC177 BH2 has a fast vertical roll. > I thought this to be a piece of cake,but by now it gives me a hard time > > I have checked the voltages on the vert IC U4501 and they are all within > specs. > Only the frequencies are 45 hz on pin one and pin 3 instead of 59 hz. > And on pin 5 the vert out I get a horizontal frequency of 15734 Hz > > I have checked C4505-C4506 they are OK > I am running out of idea's and am wondering if someone has a clue to this > problem. > thank you in advance > John H Smit > Smit's TV Service > Box10 > Gunnison Utah 84634 > 800-355-4948 Phone&Fax > 435-528-7955 Phone&Fax > jsm@xxxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/