did! Bruce Tiedeman wrote: > > Phil change the strxxx regulator , possible internal leakage. This will > eliminate that possibility. > > Bruce > B&T Electronics. > > ----- Original Message ----- > From: "Phil Bader" <philbad@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, August 28, 2001 2:21 PM > Subject: [TechAssist] [Fwd: TV,Sanyo DS25380 (25380-01) 60 Hz bend in pix] > > > > > > > > > -------- Original Message -------- > > Subject: TV,Sanyo DS25380 (25380-01) 60 Hz bend in pix > > Date: Tue, 28 Aug 2001 14:19:24 -0400 > > From: Phil Bader <philbad@xxxxxxxxxx> > > Organization: Jan Phyl TV Inc. > > To: "CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx" > > <CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx> > > > > Picture OK at first. After warm up a slight 60 Hz bend in pix slowly > > moves up thru screen.Over time gets very pronounced.Looks like a bad > > main filter cap.Bridged main 470 mfd,no help.Freeze sprayed ALL OVER,no > > change.Flexed chassis,not connection.I've seen rectifier diodes with > > noisey junctions do this. But I can turn it off awhile and cool it and > > good again.Unplugged CRT while it ran,let tube cool.Plugged it back and > > bars were there...not CRT.Froze the STRxxx reg.No help. > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.