[TechAssist] Re: Fwd: Magnavox VCR (VRT-462AT01)


just did one of those  Check the change arm assembly.  there should be a
spring on the left side under the change lever.  this spring allows the arm
to be pulled into position to engage eject and rewind.   part number
483546457389
or as one tech suggested just melt the spring into the plastic. its pretty
rugged and should work too.
roy aka videoclinicpana@xxxxxxxxx

----- Original Message -----
From: <WWill90634@xxxxxxx>
To: <Techassist@xxxxxxxxxxxxx>
Sent: Thursday, March 28, 2002 7:13 PM
Subject: [TechAssist] Fwd: Magnavox VCR (VRT-462AT01)


> Content-Type: text/plain; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> In a message dated 3/28/02 3:40:41 AM !!!First Boot!!!, WWill90634 writes:
>
>
> >
> > From:<A HREF="mailto:WWill90634";>WWill90634</A>
> > To:<A
HREF="mailto:Techassist@xxxxxxxxxxxxx";>Techassist@xxxxxxxxxxxxx</A>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Techs,
> > This Magnavox ( VRT-642AT01 ) JVC unit. I replaced the spring on the
slide
> > rail.
> > The unit will not load or eject cartridge. If I manually load the
> > cartridge, the unit will
> > play,rewind,fast forward and stop properly. If I press eject, unit goes
> > into play again.
> > Any help appreciated.
> >
> > Soundview  Electronics
> > Will
>
>
>
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: