[TechAssist] Fw: Zenith VCR Model VR4107 loading assembly problem

Also, check gears 3 & 4 on "cassette lift"
-Clint

----- Original Message -----
From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, August 31, 2001 7:16
Subject: Re: [TechAssist] Zenith VCR Model VR4107 loading
assembly problem


Bill you might need the IR sensor kit.  P/N 903-01487-01
-Clint

http://orpheuscomputing.com
Clint Hamilton, Owner
sales@xxxxxxxxxxxxxxxxxxxx
Tech-Assist Administration
http://tech-assist.org
techassist@xxxxxxxxxxxxx
(PLEASE include previous correspondence
if replying to this email!!)

----- Original Message -----
From: "the one" <sendmyemail@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, August 31, 2001 3:35
Subject: [TechAssist] Zenith VCR Model VR4107 loading
assembly problem



Anybody got any ideas on this one, it's a Zenith VCR
model number VR4107. When unit is plugged in the
cassette loading assembly moves back and forth about
five times and then unit shuts down. I have cleaned
SW501,SW502 and mode switch but it had no effect. Any
help would be appreciated.

        Bill





Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: