[TechAssist] Re: Fw: Re: Ghost 2001 users?

I purchased Ghost 2002 this past weekend & have been reading the notes on
Ghost 2001 on the list.  I finally got time to try out my Ghost 2002 the
past 2 nights & though a little confusing at first I find it quite simple to
use and like it.  I used it on my machine at home and here at the shop and
am quiet pleased.
Do not think it can get much simpler.

Robert J. Delhommer, Sr.
Bob's Electronics & TV Service
Maurice, LA

----- Original Message -----
From: Jim Myers <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, January 03, 2002 5:11 AM
Subject: [TechAssist] Fw: Re: Ghost 2001 users?


>
>
>
> Clint, making a full HD backup to CD-R with Take Two is probably easier
than
> "falling off a log". It takes about 20 minutes per CD then tells you to
make
> a emergency boot floppy, copies all files needed to boot and run Take Two
> restore and has a verify feature to test the boot floppy and check the
> backup data. This is on a 700mhz system with an external usb Sony CD-RW
4x.
> Jim Myers
> jr.myers@xxxxxxxxxxx
> ----- Original Message -----
> From: "OrpheusComputing.com Repair" <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 12:38 PM
> Subject: Re: [TechAssist] Re: Ghost 2001 users?
>
>
> Thanks Jim.
> -Clint
>
> God Bless Us All &
> Happy New Year
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> http://ComputerHardware-ConsumerElectronics.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> TechAssist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
> 4orpheus@xxxxxxxxxxxxx  (alternates)
> orpheuscomputing@xxxxxxxxx
> (PLEASE include our previous correspondence
> if replying to this email!!)
>
>
> ----- Original Message -----
> From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 11:15 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> Clint, I have Easy CD Creator 5 which includes Take Two but
> have not used
> that part of it, the help file says you can make a complete
> backup to CD in
> three easy steps and then do a full restore or a selective
> restore. I'll try
> it at home this evening and post the results. The parts of
> Easy CD Creator
> that I have used work well with no problems.
> Jim Myers
> jr.myers@xxxxxxxxxxx
> ----- Original Message -----
> From: "OrpheusComputing.com Repair"
> <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 11:50 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> Right now I am checking out Adaptec's (Roxio) "Take Two".
> Looks MUCH simpler than Ghost.  Can anyone tell me if it
> works like Ghost and will create an exact image of a HD like
> Ghost than can be restored?
> -Clint
>
> God Bless Us All &
> Happy New Year
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> http://ComputerHardware-ConsumerElectronics.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> (PLEASE include our previous correspondence
> if replying to this email!!)
>
>
> ----- Original Message -----
> From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 9:55 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> I didn't realize that you were going to transfer everything
> from one HD to
> another, sounds like a good way to do it if you get it to
> work. I use
> Laplink to do that by installing Laplink then clone directly
> from one drive
> to another. Works well but only if you have Laplink of
> course.
> Jim Myers
> jr.myers@xxxxxxxxxxx
> ----- Original Message -----
> From: "OrpheusComputing.com Repair"
> <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 9:51 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> I do that, but the best way and fastest way is to make an
> 'image' of a new HD then 'restore' it to a new HD.  No
> installation of windows or any programs, settings, etc is
> needed if you do that.  It 'restores' automatically to
> another HD or your newly formatted existing drive in case of
> a HD or OS failure.  You run the program, and you don't need
> to do or install anything, the new HD is created sector by
> sector as the old one was.
> -Clint
>
> God Bless Us All &
> Happy New Year
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> http://ComputerHardware-ConsumerElectronics.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> TechAssist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
> 4orpheus@xxxxxxxxxxxxx  (alternates)
> orpheuscomputing@xxxxxxxxx
> (PLEASE include our previous correspondence
> if replying to this email!!)
>
>
> ----- Original Message -----
> From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 8:36 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> Wouldn't you be better off using a CD-RW disk so you can keep
> it up to date?
> I don't do a full HD backup but do keep a backup of
> Quickbooks and Quicken
> using the built in backup command. I would think Ghost would
> work well that
> way since the CD-RW is set up to be used as a hard drive.
> Jim Myers
> jr.myers@xxxxxxxxxxx
> ----- Original Message -----
> From: "OrpheusComputing.com Repair"
> <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 8:27 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> I Can't get that far.  I made the FLOPPY boot disk, and boot
> from that and got to the 'interface' in DOS, but there are
> too many options there I know nothing about.  I cannot find
> the simple info on just how to get it started, how to start
> copying to cdr disks!  108 page manual and nothing in it
> about all these 'options' I see or simply how to get started.
> -Clint
>
> God Bless Us All &
> Happy New Year
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> http://ComputerHardware-ConsumerElectronics.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> TechAssist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
> 4orpheus@xxxxxxxxxxxxx  (alternates)
> orpheuscomputing@xxxxxxxxx
> (PLEASE include our previous correspondence
> if replying to this email!!)
>
>
> ----- Original Message -----
> From: "redwitch01" <redwitch01@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 8:46 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
>
> No,  but did you make the first disk in the set bootable that
> is it can run
> from the time that your computer is turned on before the OS
> starts
>
> ----- Original Message -----
> From: "OrpheusComputing.com Repair"
> <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 02, 2002 4:10 AM
> Subject: [TechAssist] Re: Ghost 2001 users?
>
>
> >
> > That didn't come out right.  Has anyone here ever used
> Norton
> > Ghost 2001 to back up a HD and restore it with CDR disks?
> > -Clint
> >
> >
> > ----- Original Message -----
> > From: "OrpheusComputing.com Repair"
> > <techassist@xxxxxxxxxxxxxxxxxxxx>
> > To: "TechAssist" <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, January 02, 2002 6:05 AM
> > Subject: [TechAssist] Ghost 2001 users?
> >
> >
> >
> > Has anyone here every used Norton Ghost 2001 to back up and
> > HD and restore it?
> > -Clint
> >
> > God Bless Us All &
> > Happy New Year
> > Clint Hamilton, Owner
> > http://OrpheusComputing.com
> > http://ComputerHardware-ConsumerElectronics.com
> > sales@xxxxxxxxxxxxxxxxxxxx
> > Fax: 209-882-9602
> > TechAssist Administration
> > http://tech-assist.org
> > techassist@xxxxxxxxxxxxx
> > 4orpheus@xxxxxxxxxxxxx  (alternates)
> > orpheuscomputing@xxxxxxxxx
> > (PLEASE include our previous correspondence
> > if replying to this email!!)
> >
> >
> >
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here:
> > http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>


------------------------------------------
Help make your TechAssist database better!  
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: