[TechAssist] Re: Fw: CTC169 14volts down to 8volts-dead set

Al,
replace cr4118 #164589 or 164590 ecg588
and c4145 1000mfd 35v
diode will check good but replace it
Robert
supertek66@xxxxxxxxxxx
robert_herring@xxxxxxxx
H&H Electronics Inc
Dallas,Tx. 75233
----- Original Message -----
From: "AL LEATHERMAN" <alleathe@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, August 29, 2001 10:49 PM
Subject: [TechAssist] Fw: CTC169 14volts down to 8volts-dead set


>
>
> Subject: CTC169 14volts down to 8volts-dead set
>
>
> > All: changed ic driving chopper-chopper pulses at about 200 volts peak
to
> > peak,160 volts on hor.out.
> > no pulse from jungle ic to hor driver, even with 9 volts applied to
jungle
> > ic. Micro produces on pulse briefly but stays low.Appreciate help. also
> > rerplaced famous diode
> > in 14 volt/5 volt stand by circuit. al
> >
> > Al's TV
> > 224 Rt. 46
> > Mine Hill, NJ. 07803
> > 973-361-5796
> > alleathe@xxxxxxxxxxxxx
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>
Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: