Mode switch has to be in correct position, u can see alighnment marks on switch.We usually remove drive/belt so the mech won't move at all. HTH Wizard Electronics Jacksonville, TX 75766 wizhd@xxxxxxxxxxxxxxxx ----- Original Message ----- From: "Larry" <schntv@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 28, 2005 2:37 PM Subject: [TechAssist] Funai combo tvs, shutdown > is there a way to bypass the vcr deck?? > set plays good for 30 seconds then goes off. > the deck has mechanical problems, c it be bypassed > electrically, so the tv will play.? > Larry > > -- > Schneider TV & Electronic Inc. > 5415 N. Wooster ave. > Dover, Ohio 44622 www.geocities.com/schntv2000/ > 330-343-0768 FCC. first class & Extra class K8WLY > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/