I was ready to call the customer on this one and come to find out the volume control is bad. Dirty contacts on one channel so the volume is at different ranges for each channel. I tore the volume control apart and cleaned it which made it better, but still at different levels at range 25%. Does anyone have one of these lying around I could purchase? Number on the POT(Sticker on back) is M250KN***(CAN'T READ LAST DIGITS) Under that 373m1 Thank you. Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: <support@xxxxxxxxxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 03, 2003 6:19 PM Subject: [TechAssist] TA Technics receiver SA5370(Panasonic)..No right channel sound I don't do much in audio, but this is for a member of our borough development committee and I told him I would look at it. This unit is probably 20 or so years old, but he wants it fixed. Unit came in with actually really low audio on right channel. Turn balance all the way and have some sound from the tuner. I have my 40(+/-) on the amps, but have trouble after that without a schematic. The rear fuse is fine as well as the speaker connectors. I'm not sure where to inject my audio signal to start testing. I tried checking components by comparing the similar ones on the left channel and got no where. Anyone have any ideas, or a print? Thank you. Jeff Dougherty ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/