[TechAssist] Re: Fisher FVH7300 - wont load all the way, ejects tape.

  • From: "becyn" <becyn@xxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 25 Nov 2003 12:32:21 -0500

No drum fg is causing the shutdown. Sometimes drum failure is caused by mode
alignment, or possibly some issue with the drum motor/servo.

Is this "old dog" worth the effort?

Jim McVey
McVey Alltronix
327 Broadway
Newburgh Ny 12550
ph: 845 561 8383
fx: 845 561 9017
Consumer electronics &
computer service.
Factory authorized for
over twenty brands.


----- Original Message ----- 
From: "Mike Jensen" <soundpromikej@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, November 24, 2003 7:51 PM
Subject: [TechAssist] Re: Fisher FVH7300 - wont load all the way, ejects
tape.


> Jim,
> The drum spins momentarily at initial power on but does not start when
tape
> is loaded.
>
> Mike Jensen
> Sound Pro
> Rapid City, SD
> Fax: 605-348-2252
> soundpromikej@xxxxxxxxxxx
> soundproservice@xxxxxxxxxxxx
> ----- Original Message ----- 
> From: "becyn" <becyn@xxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, November 24, 2003 6:56 PM
> Subject: [TechAssist] Re: Fisher FVH7300 - wont load all the way, ejects
> tape.
>
>
> > hello mike,
> >
> > Does the drum start??
> >
> >
> > Jim McVey
> > McVey Alltronix
> > 327 Broadway
> > Newburgh Ny 12550
> > ph: 845 561 8383
> > fx: 845 561 9017
> > Consumer electronics &
> > computer service.
> > Factory authorized for
> > over twenty brands.
> > ----- Original Message ----- 
> > From: "Mike Jensen" <soundpromikej@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Monday, November 24, 2003 5:38 PM
> > Subject: [TechAssist] Fisher FVH7300 - wont load all the way, ejects
tape.
> >
> >
> > > Unit came in with a no load symptom. Replaced loading belt and mode
> > switch, still have a similar problem. Unit takes tape all the way in but
> > does not start to load tape path, instead ejects tape.  Have inspected
all
> > loading gears for stripped/missing teeth, mechanical timing appears to
be
> > correct based on marks in the chassis and gears.  I still suspect some
> sort
> > of timing issue but have no alignment manual.  If anyone has a
mechanical
> > manual for this unit or any suggestions it would be greatly appreciated.
> > TIA.
> > >
> > > Mike Jensen
> > > Sound Pro
> > > Rapid City, SD
> > > Fax: 605-348-2252
> > > soundpromikej@xxxxxxxxxxx
> > > soundproservice@xxxxxxxxxxxx
> > >
> >
>
****************************************************************************
> > *
> > > Lost Password:
> > > http://www.tech-assist.org  and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> >
> >
> >
>
****************************************************************************
> *
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/


*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: