When I press power, the power LED does not light, but power standby does. There is no output. Q413, Q414 have low resistance, in circuit..there are next to power transistors on large heat sink. Before I pull these, is this normal? It seems if they were leaky, the fuse should open. I have no relay click when I press power. 110vac on relay even when I press power..12vdc on other side. Can I jump this relay to confirm the relay is bad? Jeff www.9-11-2001tragedy.com Help those affected by the NY/PA tragedy: The Red Cross needs is mobilizing a national blood drive and needs your help. Please call 800-GIVE LIFE, to find out where in your area you can donate blood. FAX 1-413-280-0677 Intrepid Video & Electronics Harrisburg, PA 17111 717-909-8844 www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.