Tks Kev,mines reading a tad over 2vdc so I'll change the IC06........ Don of HARTS-TVCR-ASC 9 Robert St,Oromocto,NB,Canada,E2V3N2 Tel-506-357-9785,Fax-506-357-6010 hartstv@xxxxxxxxxxx ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 10, 2003 4:13 PM Subject: [TechAssist] Re: FIXED, Sony HCD-RX55 won't load CD. > 4.7 volts. > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of > hartstv@xxxxxxxxxxx > Sent: Wednesday, December 10, 2003 10:48 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: FIXED, Sony HCD-RX55 won't load CD. > > Kevin,What was the voltage you measured on the motor that turns the > table? > Got one on the bench that will open & close the table but will not turn > it > or raise/lower the lazer assy. > Don of HARTS-TVCR-ASC > 9 Robert St,Oromocto,NB,Canada,E2V3N2 > Tel-506-357-9785,Fax-506-357-6010 > hartstv@xxxxxxxxxxx > > > > ----- Original Message ----- > From: "Kevin" <kevintv@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, December 09, 2003 6:01 PM > Subject: [TechAssist] Re: FIXED, Sony HCD-RX55 won't load CD. > > > > I measured the voltage of the motor (see post below) and the voltage > was > > switching from '+' to '-' as soon as the platter stopped > > turning--indicating that the motor was indeed turning clockwise (I > can't > > see the motor turning because it is all covered in plastic. I finally > > figured out the timing of the gears and CD platter. I am guessing > that > > the customer had a problem with CD's skipping and he took it more > apart > > than he needed to--causing a second problem for him and a bigger > problem > > for me. > > > > Kevin Wilks > > Kevin's TV & Video Repair > > Penticton BC Canada > > kevintv@xxxxxxx > > > > > > -----Original Message----- > > From: techassist-bounce@xxxxxxxxxxxxx > > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin > > Sent: Tuesday, December 09, 2003 1:00 PM > > To: TECH-ASSIST > > Subject: [TechAssist] Sony HCD-RX55 won't load CD. > > > > This mini stereo systems uses one motor to spin the 3 CD tray (motor > > spins counter-clockwise). Once it finds the one CD I placed in the > > tray, the same motor is supposed to turn clockwise, engaging another > > gear that raises and lowers the optical pickup assembly. The problem > is > > once the CD is found, the motor keeps spinning counter-clockwise until > > it shuts down. Has anyone seen this problem before? TIA. > > > > Kevin Wilks > > Kevin's TV & Video Repair > > Penticton BC Canada > > kevintv@xxxxxxx > > > > > > > > > ************************************************************************ > > ***** > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > ************************************************************************ > **** > * > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > ************************************************************************ > ***** > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/