[TechAssist] Re: Daewoo DTQ26F1SC Chassis CN2001


Jeff: That is the model no of the back. The chassis no is CN200I not CN2001
as I wrote in the subject line.
This is a Canadian model and maybe the no's are slighty different.

Thanks Buck.


----- Original Message -----
From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, March 30, 2002 9:59 PM
Subject: [TechAssist] Re: Daewoo DTQ26F1SC Chassis CN2001


>
> Buck,
> Are you sure of that model number?
> For DTQ26S1FC:
> Open Cap, C404 (1Uf 160V), Shorted Transistor, Q803(Ksc2500), Defective
> Transistors, Q805(Ktc3203), Q804(Kse13009), Q402 (2sd1880), Open Resistor,
> R818 (0.33 Ohm 1 W)
> Jeff
>
> FAX 717-564-4952
> Jeff Dougherty
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> VCR tips, electronics info & general interest.
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
>
>
> ----- Original Message -----
> From: "sterling pasher" <spasher@xxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Saturday, March 30, 2002 2:35 PM
> Subject: [TechAssist] Re: Daewoo DTQ26F1SC Chassis CN2001
>
>
> >
> >
> >
> >
> >
> > > > HI guys: I see a lot off Deawoo traffic lately. Perhaps some one can
> > give
> > > me
> > > > some advice. I have one that came in with the following symptoms.
R818
> > > open,
> > > > 103 volt line OK, but only 10 volts on the 12 volt line, and the 5
> line
> > > volt
> > > > is OK. The set won't come on.
> > > > Any help would be appriecated.
> > >
> > > > Buck Pasher
> > > > Bucks TV
> > > > Gander NF Canada
> > > > spasher@xxxxxxxxxxxxxxxxx
> > > >
> > > >
> > >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: