[TechAssist] Re: CTX MONITOR - MDL VL700
- From: "STEFANUS LOTTER" <fanusl@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 25 May 2002 20:11:07 +0200
Replace Q313 and Q306.
Upgrade C340 to 47 uF/250V.
Check ZD303 and R362.
If your VL700 (there are multiple versions) has R124 = 82K in the power
supply, check that its value is correct.
Check flyback.
SR Lötter(Fanus)
Computer Support Solutions
East London
South Africa
+27827887162
----- Original Message -----
From: <MtsElec27@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, May 25, 2002 7:26 PM
Subject: [TechAssist] CTX MONITOR - MDL VL700
> Hello,
>
> Anyone have experience with this model? Power LED is on, but no raster.
> There is a slight clicking sound from the FBT area. HOT is good.
> Unfortunately I have no prints for this model. Any help is appreciated.
> Thanks. FCC ID = DBL1769E
>
>
> Erol Johnson
> MTS Electronics
>
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
