[TechAssist] Re: CTC-177AA

yes I have the values of the EPROM recorded but I can't take the unit out of
the customers house for reasons I don't want to get into right now. But I
will check what you have sent me . Thanks I'll let you know how I made out.
I am trying to get my name and address on my posts, as soon as I can find
out how.
----- Original Message -----
From: "Watcher Watcher" <Watcher000000000@xxxxxxxxxxx>
To: "techassist" <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 04, 2001 5:49 PM
Subject: [TechAssist] Re: CTC-177AA


> Sounds to me like you need to do a complete tuner alignment then. I hope
you recorded the eeprom values before replacing the chip. Have you done one
of those before? Might be Y7401 off freq. Check C7507. Also Q4106 possibly
shorted, R4132 open and R4130 open. Replace L2302 at end of T chip. Repair
trace from 12V to collector of Q7601 SAW AMP. Check U7301 see if pin 1 has
any output.
> Affordable John
> Affordable Electronics
> Tumwater Wash.
> 98501
> 360-786-9507
>
> ----- Original Message -----
> From: Dave
> Sent: Thursday, October 04, 2001 2:38 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: CTC-177AA
>
>
> I am a tech and I'm sorry my message wasn't clear I did the re solder and
> replaced the epprom  #218400 My problem is the set can't leave the house
and
> I have no prints for RCA or GE. There are no bad connections I was hoping
> someone had a tech-tip on this problem other then connections and EEPPROM.
> ----- Original Message -----
> From: <tvdoctors@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, October 04, 2001 4:14 PM
> Subject: [TechAssist] Re: CTC-177AA
>
>
> > If he's not a tech., he probably won't know what we are talking about
and
> if he tries to perform this operation without being a skilled tech. he
will
> most likely make things a lot worse, ie, solder bridges,etc
> >
> >
> > > ** Original Subject: [TechAssist] Re: CTC-177AA
> > > ** Original Sender: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> > > ** Original Date: Thu,  4 Oct 2001 13:56:59 -0500 (EST)
> >
> > > ** Original Message follows...
> >
> > >
> > > The post doesn't say what he has checked or soldered.  If all B+ volts
> check
> > > out in tuner area.
> > >  Its just like the previous post that said "what are the horz. tips
for
> this
> > > set"
> > > I thought this E-mail group was for  technicians
> > > Phillip R Hull
> > > phil245@xxxxxxxxxxxxx
> > > ----- Original Message -----From: "Dave" <tvman@xxxxxxxxxxxxxxx>
> > > To: "Tech Line" <techassist@xxxxxxxxxxxxx>
> > > Sent: Thursday, October 04, 2001 2:30 PM
> > > Subject: [TechAssist] CTC-177AA
> > >
> > >
> > > > I have a CTC177AA that has snow on all channels any tech tips on
this
> > > chassis
> > > >
> > > > Help make your TechAssist online repair tips
> > > > database better!  Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with  unsubscribe  in the subject line.
> > > >
> > > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better!  Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with  unsubscribe  in the subject line.
> >
> >
> > >** --------- End Original Message ----------- **
> >
> > >
> >
> >
> > Download The Grinch Browser at http://www.meanone.com/grinchBrowser.html
> >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.Get more from the Web.  FREE MSN
Explorer download : http://explorer.msn.com
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: