[TechAssist] Re: CTC169, C4108, 39uf or 47uf?

  • From: Gary McCartney <gary@xxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Tue, 09 Dec 2003 00:31:55 -0500

Jeff, that is true for filtering but not necessarily so for timing
situations.



Gary McCartney

McCartney Electronics
Guelph Ontario Canada 
Est. 1984
email: gary (at) number63.ca








support@xxxxxxxxxxxxxxxxxx wrote:
> 
> Jim,
> If in doubt, I use the higher value cap. You are generally safer that way. 
> Never go lower unless you are
> sure.
> 
> Jeff Dougherty
> Intrepid Video TV/VCR
> 263 S Front St
> Steelton PA 17113
> fax...717-564-4952
> www.intrepid-video.com www.tech-repair.net
> 
> ----- Original Message -----
> From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> To: "TechAssist" <techassist@xxxxxxxxxxxxx>
> Sent: Monday, December 08, 2003 9:53 AM
> Subject: [TechAssist] CTC169, C4108, 39uf or 47uf?
> 
> Does anyone know the real reason that some CTC169 chassis use a 39uf@100v
> for C4108 and others use a 47uf@50V? I've heard that the 39uf is an upgrade
> but if that were true I think PartsFinder would sub the 47uf to the 39uf.
> Answer only if you really know, don't waste time with speculation.
> Thanks,
> **************************************************
> Jim Myers
> Since 1972
> Telrad Electronic Services Co.
> Fort Wayne, IN 46815
> *************************************************
> 
> *****************************************************************************
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
> 
> *****************************************************************************
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/

--

*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: