[TechAssist] Re: CTC130 Tuning Problems
- From: Jon Garver <jongar@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sun, 25 Nov 2001 23:27:30 -0500
This thread got me curious enough to look it up.
According to the RCA Technical Review manual, it is capable of
receiving 94 cable channels (MTT001 tuner). It is true that the
earlier chassis were very limited on the cable channels, the
CTC120 comes to mind.
Jon
Jerry wrote:
> Uh, no, I don't think that's true, the MTT series of tuner used in the
> ctc130's is capable of cable channels of at least to the mid 60's or so as I
> recall.
> Jerry
> Christian's Electronics Service.
>
> ----- Original Message -----
> From: "Robert Herring" <supertek66@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, November 20, 2001 1:09 PM
> Subject: [TechAssist] Re: CTC130 Tuning Problems
>
> |
> | This is true your chassis CTC 130 only gets up to 36 in cable mode
> | Robert
> | supertek66@xxxxxxxxxxx
> | robert_herring@xxxxxxxx
> | H&H Electronics Inc
> | Dallas,Tx. 75233
> | ----- Original Message -----
> | From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
> | To: <techassist@xxxxxxxxxxxxx>
> | Sent: Sunday, November 18, 2001 9:31 AM
> | Subject: [TechAssist] Re: CTC130 Tuning Problems
> |
> |
> | >
> | > May be tuner is at it's peak. Some tuners only went to CH36, at that
> time.
> | >
> | > -Ed-
> | > Tel-Tek Electronics
> | > teltek@xxxxxxxxxxx
> | >
> | >
> | > ----- Original Message -----
> | > From: "Teal, David" <Teald@xxxxxxxxxxx>
> | > To: <techassist@xxxxxxxxxxxxx>
> | > Sent: Saturday, November 17, 2001 12:42 PM
> | > Subject: [TechAssist] CTC130 Tuning Problems
> | >
> | >
> | > >
> | > > I have an RCA CTC130 in the shop that will not detect channels above
> 37
> | > when "auto programming". Channels 30-37 are very noisy, while the rest
> | > (2-29) are very clear. Any known problems with this particular chassis
> in
> | > the tuner section?
> | > >
> | > > Thanks,
> | > > Dave Teal
> | > > *****************************************
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
