This is true your chassis CTC 130 only gets up to 36 in cable mode Robert supertek66@xxxxxxxxxxx robert_herring@xxxxxxxx H&H Electronics Inc Dallas,Tx. 75233 ----- Original Message ----- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, November 18, 2001 9:31 AM Subject: [TechAssist] Re: CTC130 Tuning Problems > > May be tuner is at it's peak. Some tuners only went to CH36, at that time. > > -Ed- > Tel-Tek Electronics > teltek@xxxxxxxxxxx > > > ----- Original Message ----- > From: "Teal, David" <Teald@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, November 17, 2001 12:42 PM > Subject: [TechAssist] CTC130 Tuning Problems > > > > > > I have an RCA CTC130 in the shop that will not detect channels above 37 > when "auto programming". Channels 30-37 are very noisy, while the rest > (2-29) are very clear. Any known problems with this particular chassis in > the tuner section? > > > > Thanks, > > Dave Teal > > ***************************************** > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > ***************************************** > > To UNSUBSCRIBE write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe