[TechAssist] Re: CTC 169 CC2

I have seen some screen focus blocks go bad but there are 2 versions. The
ones I see bad are the sort of white colored ones that can be taked apart.
If you have one just take it apart and look for burns. If is it one of the
black ones usually for a set with a dual focus, I can't say I have had to
change one before. Unfortunately you can't disassemble those. I might ad
there is a fix finder note on Thomsons website about the driver transformer
being bad. If you look at the top of the tube on the driver trans and the
glues is missing or loose the core can move. I had one I just slide back in
place and the set started working.


HTH

Jason Mouton
Mouton's Electronics
1116 Center St.
New Iberia, LA 70560
337-364-1641 Phone/Fax
moutons@xxxxxxxxxxxxxxxx


----- Original Message -----
From: "Barry Thompson" <barrystv@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 28, 2002 10:04 AM
Subject: [TechAssist] Re: CTC 169 CC2


>
> No Ron It's not
> barrystv@xxxxxxx
> Barrys TV
> 613 224 3406
> Ottawa Canada
> ----- Original Message -----
> From: "Ron Miller" <rlmbkm@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, November 28, 2002 10:07 AM
> Subject: [TechAssist] Re: CTC 169 CC2
>
>
> >
> > If this is a prjo I would look for a coolant leak,a few drops at the
anode
> > connector and POW also don't forget about the splitter 205064.
> > Country TV
> > Ron Miller
> > 484 FM444 S.
> > Inez,TX 77968-5002
> > V.(361)782-6419. F.(361)782-9149
> > e-mail: rlmbkm@xxxxxxxx
> >
> > ----- Original Message -----
> > From: "Barry Thompson" <barrystv@xxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Thursday, November 28, 2002 8:44 AM
> > Subject: [TechAssist] CTC 169 CC2
> >
> >
> > >
> > > HI All: This set came in with a shorted HOT. Checked all the 3 HV Caps
> and
> > > two diodes, changed,cr4118.With the HOT disabled I checked all the
> standby
> > > voltages,get pulse on the base of the hot for about a second and a
half
> > when
> > > I turn on.Inabled HOT and put a 100 watt bulb in series with the
> line.The
> > > bulb does not come on and I get one Crack at the second anode, I guess
> the
> > > flyback must be shorted to the core. Could the screen focus block
cause
> > ths
> > > Barry.
> > > barrystv@xxxxxxx
> > > Barrys TV
> > > 613 224 3406
> > > Ottawa Canada
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > >   http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > >   http://www.techassist.net/forms/change.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> > >
> > >
> >
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> >   http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> >   http://www.techassist.net/forms/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/


------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: