Thanks for the information Warren, and thanks to all who responded. I called him back, and it looks like he expected I would have a used one that I was just dieing to get rid of for 10 or 15 bucks. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "Warren C." <warrenca@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 26, 2004 12:08 AM Subject: [TechAssist] Re: CM rotor box > All Three wire rotors for CM are compatible. > What I would now use is the new CM that has a remote control and a digital memory > that the customer can store and when you put in the channel number like 09 the > rotor would rotate to the pre stored direction. > The readout is in degrees rotation from north. It's quite neat and is available > controller only if you wish. > This unit is backward compatible too to all 3 wire drive units. > > HTH > Warren Campbell > Campbell's TV & Appliances > > Hoyt's TV wrote: > > > I have a customer who's looking for the control box for a Channel Master > > rotor Model 9512-A > > > > Russ Hoyt > > Hoyt's TV > > Exeter, NH > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/