[TechAssist] Re: BUSH 2568 NTX - any info at all?
- From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 21 Jan 2002 09:28:53 -0000
Hello, R629 ok, this is the only troubleshooting tip that I could find on
this model (value is 2.2 ohms on my tv)
Thanks
----- Original Message -----
From: "Charles Belich" <seashell@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, January 21, 2002 4:11 AM
Subject: [TechAssist] Re: BUSH 2568 NTX - any info at all?
>
> Lack of width = R629 2r7 check solder in this area...........Charlie
>
> Charles Belich
> Slidewire Electronics
> 108 S. 1st. Ave KL
> Hibbing , MN 55746
> Mailto:seashell@xxxxxxxxxx
> Ph: 218-263-7090
> ----- Original Message -----
> From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, January 20, 2002 4:57 PM
> Subject: [TechAssist] BUSH 2568 NTX - any info at all?
>
>
>
> Hi, anybody out there got ANY info on the tv BUSH 2568 NTX - getting info
on
> this tv is extrememly difficult.
> All the best
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
