[TechAssist] Re: Apex CTV Model AT2002/CN12C1 chasis

  • From: JSopko112@xxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 8 Oct 2004 07:25:35 EDT

In a message dated 10/7/2004 11:12:34 PM Eastern Daylight Time, 
birdie@xxxxxxxxxxxxx writes:> A customer brought in this tv which when powered 
on all there 
> is on the
> screen is a red key symbol on the bottom left corner. Probably in child
> lock but I can't figure how to get out of this mode.I have tried
> numerous combinations on the remote to try to remove but can't get it
> out  of child lock.Does anyone here know what buttons to press on the
> remote to get it out of child lock?Thanks.
> Mando, Birdie's TV &Electronics
================
DEAR MANDO...We've been collecting these codes on the NesdaOhio website for 
some time now...I did a "Cut & Paste" of what we've got on the Apex for you 
below...  if you ever come up with any to add, please send them to us for 
others 
to use.
joe sopko, consumer service, s.euclid,oh
  
Provided by NESDA of Ohio   http://www.nesda-ohio.com 
Apex

To Remove Parental Lock

If you have not set a previous password, you can use the factory password 
which is "3308" or "99999". 

If you have forgotten your password that you created, then you will need to 
go to the Preferences Menu inside the Setup Menu and reset the unit back to 
Default settings. Then you can use the factory password again.
Service Menu, PU-1 Chassis 


Click Here PDF


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: