Try Q-3401 = 121-1146 = ecg-123/ecg-287 Bridge C-E and see if you can force the set on. Check Horizontal pulses Pin 23 of IC-1200 are brief. Pin #26 has 5VDC. good luck also check a small resistor under the 10 watt in the power supply cant find my notes on this one. fuzzzzzzzzzz ----- Original Message ----- From: "Dave" <tvman@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, September 23, 2001 9:54 AM Subject: [TechAssist] Re: 2nd post: zenith 9-1244 Model SLS1935w,Dead Check Q3200 if good replace TA8879N[221-806] ----- Original Message ----- From: "Jonas Miglinas" <miglinasj@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, September 22, 2001 7:52 PM Subject: [TechAssist] Re: 2nd post: zenith 9-1244 Model SLS1935w,Dead > > Frank, > I've had this problem before and the two solutions was to replace the 130v > regulator or the 12v regulator (it will check ok, just replace it) Sorry, i > don't have the schematic in front of me, i can't give you a number of > location > Hope this helps Jonas----- Original Message ----- > From: "Frank Luu" <fkluu@xxxxxxxxx> > To: "Tech" <techassist@xxxxxxxxxxxxx> > Sent: Saturday, September 22, 2001 8:18 AM > Subject: [TechAssist] 2nd post: zenith 9-1244 Model SLS1935w,Dead > > > > > > > > Hi all: > > This unit won't come on (sometimes it did come on). > > Relay keep cycling. Voltage regulator OK 130V.Replaced > > jungle IC, still won't work. > > Any help is appreciated. > > Frank > > > > > > __________________________________________________ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger. http://im.yahoo.com > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.