May we ass-u-me you are referring to the Sony IK resistor modification? If so it takes 3 resistors, one connected to each cathode pin and the other ends all connected together. ******************************** Since 1972 * Jim Myers * Telrad Electronics * Fort Wayne Indiana * ******************************** BOSS1996@xxxxxxx wrote: > Sorry if this has been asked a million times but what exactly do you have to > do for this mod? Reading the many posts about it indicate putting a resistor > on the CRT board but there is no mention on where. Or mention of some spanish > doc. which would not be too helpful. > TIA > > > Robert Cardoza > Picture Perfect Elec. > 9940 NW 6th Ct > Pembroke Pines, Fla, 33024 > 954-435-5868 > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/