[tccrockets] Re: Intimidator 4

He is on the chat

 

Jack G

 

From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] 
On Behalf Of shawn stephens
Sent: Wednesday, July 13, 2011 4:14 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Intimidator 4

 

what's his contact info.? with this new chat room you cant contact anyone off 
chat

 

Shawn

----- Original Message ----- 

From: Jack Garibaldi <mailto:jackgaribaldi@xxxxxxx>  

To: tccrockets@xxxxxxxxxxxxx 

Sent: Wednesday, July 13, 2011 4:11 PM

Subject: [tccrockets] Re: Intimidator 4

 

Asked Mike Bailey he was selling all of Frank’s stuff on E-bay

 

Jack G

 

From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] 
On Behalf Of shawn stephens
Sent: Wednesday, July 13, 2011 4:07 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Intimidator 4

 

how do you get a hold of Dave Trino? Kosdon was working on an old case of mine 
before he passed and I'm wondering if he has it

 

---Shawn Stephens

----- Original Message ----- 

From: mike bailey <mailto:aerofabb@xxxxxxxxxxxx>  

To: tccrockets@xxxxxxxxxxxxx 

Sent: Tuesday, July 12, 2011 7:06 PM

Subject: [tccrockets] Re: Intimidator 4

 

Im not sure if Frank changed the parts for his Kosdon 75/7600, but the motor I 
got from Dave Trino, who inherited Franks stuff, sold me a Kosdon 75/7600 
complete motor for $275.00 and it has a black anodize forward closure and uses 
a thrust ring on the outside of the case, and from what Jack has told me, I 
have the older Kosdon East motor which uses the thrust ring groove and has a 
AMW forward closure and nozzle,  but i don't know what changes Frank made after 
those.  I have some of Franks  54mm motors with and without the thrust ring 
groove, so i dont know if he made any 75mm motor casings without the thrust 
ring.    but looking at the Aerotech KBA instructions for the Aerotech KBA 
M1450W  it showed this:


 

USE ONLY KBA RELOAD KITS AND MOTOR PARTS TO REFURBISH

YOUR KOSDON OR ANIMAL MOTOR. The KBA reload kits have been

designed specifically for use in your particular Kosdon or Animal motor. Use

of imitation components may destroy your motor, rocket and payload and

will invalidate your motor warranty. Only use KBA reload kits intended for

your specific Kosdon or Animal motor. DO NOT INTERCHANGE PARTS!

Do not use KBA reload kits or motor components for any other purpose than

to refurbish an Kosdon or Animal motor.

 

so its showing that it should only be used with Kosdon or AMW motors and not 
just only for AMW.   I don't know if Frank made changes to his 75/7600 and 
changed the nozzle and forward closure.   Maybe you seen different ones?

 

 

 

-----Original Message-----
From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Fri, Jul 8, 2011 5:39 pm
Subject: [tccrockets] Re: Intimidator 4

Well, it may "go into" the Kosdon TRM case at a research launch  but it is only 
certified with the AMW nozzle and bulkhead.  I think a lot of people get 
confused by the KBA label thinking the Animal Compatable reloads can go in 
either Kosdon or AMW hardware and be certified but they aren't.




  _____  


From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Friday, July 8, 2011 1:45:32 AM
Subject: [tccrockets] Re: Intimidator 4

It will go into a Kosdon 75/7600 casing.  they same size.  I have one.

 

-----Original Message-----
From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Thu, Jul 7, 2011 8:26 pm
Subject: [tccrockets] Re: Intimidator 4

Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW 7600 
case with a reusable nozzle.  One nice thing about the AMW case is that it is 
great for EX motors.  It seems like a great deal to me.




  _____  


From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Thursday, July 7, 2011 7:09:38 PM
Subject: [tccrockets] Re: Intimidator 4

I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and was use 
to set the M altitude record, its more powerful than the M1850W  7658.6Ns.  and 
for around 299.00  its about a hundred dollars cheaper than the M1850W

 

-----Original Message-----
From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Wed, Jul 6, 2011 7:07 pm
Subject: [tccrockets] Re: Intimidator 4

The AeroTech M1850W is no puss motor for the 75/7680.  It lofted my Performance 
Rocketry Competitor 4 to 18,600 feet.   

 

Video by James Dougherty:

http://www.youtube.com/watch?v=wdRS2xaqtbc

 

But just leave that 75mm motor mount out of the Intimidator 4, make it a 
minimum diameter, and fly it on an M750W 8^D

Aaron Stanley
LUNAR# 1322
AEROPAC# 680
SARG# 10  - Equipment Manager
TRA# 10834 L3
NAR# 84298 L3
West Coast  <http://www.wemakethegoodstuff.com/> Aerotech Demo representative.
 <http://www.wemakethegoodstuff.com/> Aerotech the BEST way to fly.

 


  _____  


From: "James Marino" <jmarino1@xxxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Wednesday, July 6, 2011 10:22:46 AM
Subject: [tccrockets] Re: Intimidator 4

        It has to fly on puss motors. It has a 75mm mount. 

 

        The Intimidator 5 and the Competitor 5 both have 98mm holes in the 
bottom. 

 

        They take real motors. 8^)

 

J

 

----- Original Message ----- 

From: Jack Garibaldi <mailto:jackgaribaldi@xxxxxxx>  

To: tccrockets@xxxxxxxxxxxxx 

Sent: Tuesday, July 05, 2011 10:33 PM

Subject: [tccrockets] Re: Intimidator 4

 

Yes as long as you don’t fly it on any puss motor

 

Jack G

 

From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx 
<mailto:tccrockets-bounce@xxxxxxxxxxxxx?> ] On Behalf Of Rob Diehl
Sent: Tuesday, July 05, 2011 10:10 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Intimidator 4

 

Ok, I got my Intimidator 4 kit today.  Does anyone know where I can find 2 
TAP’s to do my L3?

 

 

Rob

Other related posts: