[tccrockets] Re: Intimidator 4
- From: "shawn stephens" <shawn.stephens4@xxxxxxx>
- To: <tccrockets@xxxxxxxxxxxxx>
- Date: Wed, 13 Jul 2011 16:14:21 -0700
what's his contact info.? with this new chat room you cant contact anyone off
chat
Shawn
----- Original Message -----
From: Jack Garibaldi
To: tccrockets@xxxxxxxxxxxxx
Sent: Wednesday, July 13, 2011 4:11 PM
Subject: [tccrockets] Re: Intimidator 4
Asked Mike Bailey he was selling all of Frank’s stuff on E-bay
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of shawn stephens
Sent: Wednesday, July 13, 2011 4:07 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Intimidator 4
how do you get a hold of Dave Trino? Kosdon was working on an old case of
mine before he passed and I'm wondering if he has it
---Shawn Stephens
----- Original Message -----
From: mike bailey
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, July 12, 2011 7:06 PM
Subject: [tccrockets] Re: Intimidator 4
Im not sure if Frank changed the parts for his Kosdon 75/7600, but the
motor I got from Dave Trino, who inherited Franks stuff, sold me a Kosdon
75/7600 complete motor for $275.00 and it has a black anodize forward closure
and uses a thrust ring on the outside of the case, and from what Jack has told
me, I have the older Kosdon East motor which uses the thrust ring groove and
has a AMW forward closure and nozzle, but i don't know what changes Frank made
after those. I have some of Franks 54mm motors with and without the thrust
ring groove, so i dont know if he made any 75mm motor casings without the
thrust ring. but looking at the Aerotech KBA instructions for the Aerotech
KBA M1450W it showed this:
USE ONLY KBA RELOAD KITS AND MOTOR PARTS TO REFURBISH
YOUR KOSDON OR ANIMAL MOTOR. The KBA reload kits have been
designed specifically for use in your particular Kosdon or Animal motor. Use
of imitation components may destroy your motor, rocket and payload and
will invalidate your motor warranty. Only use KBA reload kits intended for
your specific Kosdon or Animal motor. DO NOT INTERCHANGE PARTS!
Do not use KBA reload kits or motor components for any other purpose than
to refurbish an Kosdon or Animal motor.
so its showing that it should only be used with Kosdon or AMW motors and
not just only for AMW. I don't know if Frank made changes to his 75/7600 and
changed the nozzle and forward closure. Maybe you seen different ones?
-----Original Message-----
From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Fri, Jul 8, 2011 5:39 pm
Subject: [tccrockets] Re: Intimidator 4
Well, it may "go into" the Kosdon TRM case at a research launch but it is
only certified with the AMW nozzle and bulkhead. I think a lot of people get
confused by the KBA label thinking the Animal Compatable reloads can go in
either Kosdon or AMW hardware and be certified but they aren't.
----------------------------------------------------------------------------
From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Friday, July 8, 2011 1:45:32 AM
Subject: [tccrockets] Re: Intimidator 4
It will go into a Kosdon 75/7600 casing. they same size. I have one.
-----Original Message-----
From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Thu, Jul 7, 2011 8:26 pm
Subject: [tccrockets] Re: Intimidator 4
Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW
7600 case with a reusable nozzle. One nice thing about the AMW case is that it
is great for EX motors. It seems like a great deal to me.
----------------------------------------------------------------------------
From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Thursday, July 7, 2011 7:09:38 PM
Subject: [tccrockets] Re: Intimidator 4
I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and was
use to set the M altitude record, its more powerful than the M1850W 7658.6Ns.
and for around 299.00 its about a hundred dollars cheaper than the M1850W
-----Original Message-----
From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Wed, Jul 6, 2011 7:07 pm
Subject: [tccrockets] Re: Intimidator 4
The AeroTech M1850W is no puss motor for the 75/7680. It lofted my
Performance Rocketry Competitor 4 to 18,600 feet.
Video by James Dougherty:
http://www.youtube.com/watch?v=wdRS2xaqtbc
But just leave that 75mm motor mount out of the Intimidator 4, make it a
minimum diameter, and fly it on an M750W 8^D
Aaron Stanley
LUNAR# 1322
AEROPAC# 680
SARG# 10 - Equipment Manager
TRA# 10834 L3
NAR# 84298 L3
West Coast Aerotech Demo representative.
Aerotech the BEST way to fly.
----------------------------------------------------------------------------
From: "James Marino" <jmarino1@xxxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Wednesday, July 6, 2011 10:22:46 AM
Subject: [tccrockets] Re: Intimidator 4
It has to fly on puss motors. It has a 75mm mount.
The Intimidator 5 and the Competitor 5 both have 98mm holes in the
bottom.
They take real motors. 8^)
J
----- Original Message -----
From: Jack Garibaldi
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, July 05, 2011 10:33 PM
Subject: [tccrockets] Re: Intimidator 4
Yes as long as you don’t fly it on any puss motor
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
Sent: Tuesday, July 05, 2011 10:10 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Intimidator 4
Ok, I got my Intimidator 4 kit today. Does anyone know where I can find
2 TAP’s to do my L3?
Rob
Other related posts:
