ya,$1100.00,will get you allot of stuff @ Qualitat,I garonteee,Doug's one of the most pleasant guy's to deal w/ he help's w/ just the stuff you need,unless your sweetooth get's to be a big appitite,know what I mean Vern!!! ---Original Message----- From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx]On Behalf Of Will Wood Sent: Monday, April 03, 2006 5:57 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: parts needed Doug down at Qualitat has long blocks for $700 or so exchange. -----Original Message----- >From: Dan Martin <danandkatrinamartin@xxxxxxx> >Sent: Apr 3, 2006 4:45 PM >To: tcb@xxxxxxxxxxxxx >Subject: [tcb] Re: parts needed > >You say you have $1100.00 budget. > >You can get brand new 1600 engine from Ronnie for $1450.00. > >http://www.type2parts.com/CatTab0-NN4-NF/default.asp?L=4&CAT=480&SC=Y > >But then you say you need brakes and tires. >The brake cylinders are about $100.00 for the 8, rebuild kits would >be cheaper..... >(69 has no booster) >I would replace all the rubber brake lines as well. > >I would see if you can find these tires local to you,(Discount Tires >can get them): > >http://www.busdepot.com/details.jsp?partnumber=RA08 > >I have a set and love them, completely different bus compared to the >cheap car tires I had. >(less than $400.00 installed) > >I think that leaves $600.00 to rebuild the engine. >Do you have the engine apart? >Can you reuse any of the stuff from the engine? >Do you need a new case? >Is the case needing to be align bored, how do you know? >Is the crank still in spec. or need to be turned? > >Than you mention valves and guides, are you going to rebuild the >heads as well? >You mention cap and rotor (I would get plugs and wires too atleast) >but not what dizzy and carb. you are using. >I am a little confused as to what you have and what you >need............. > > > >On Apr 3, 2006, at 12:04 PM, Brian Denning wrote: > >> for motor: >> fuel pump >> engine rebuild kit (pistons, cylinders, bearings (Cam & Crank), >> gaskets, valves, guides) >> Oil Cooler >> Oil Pump >> lifters >> push rods >> oil pressure sensor >> distributor cap and rotar(sp?) >> and one heat exchanger. >> >> for brakes: >> master cylinder >> wheel cylinders (all four corners totaling 8) >> shoes (front and rear) >> hardware kits (front and rear) >> >> what needs to be added? >> >> _________________________________________________________________ >> Is your PC infected? Get a FREE online computer virus scan from >> McAfee� Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp? >> cid=3963 >> >> >> > >