With a C25 don't waste your money on 044s since you're lift will be less than .390 with 1:1 rockers.  With those heads you'd probably be better off with a W110 or a W109.  If you want to run ratio rockers an FK-7 is a great choice.

-----Original Message-----
From: Mark Sawyer
Sent: Apr 22, 2008 3:03 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: hp

Engine configuration:

90.5 x 78 stroke

044 super mag head

Scat C25 cam

Dual 40 IDF Webers

windage tray

solid rocker shafts,

stock rockers,

chromoly push rods

ported and polished.

Full flow exhaust.

horsepower is a calculated estimate at 140hp

Also running a Kennedy 3500 lb pressure plate with solid clutch disc. (hard on the knee, not a clutch for traffic)

sammie smith <bugcollections@xxxxxxxxxxxxx> wrote:

Mark Sawyer:  We were talking about a 2007cc stroker motor at the Classic and our conversation got interupted and I forgot what you said about configuration and horse power.

 

Exactly how did you have this engine set up in terms of heads, cam, and carbs and did you dyno it at the crank or the wheels, and how much horse power did you say that it turned out?

 

I'm trying to get a guess ti mate of how much mine is turning with an Engle 110, Weber 34s and CB 044 heads.  My guess right now is 110-120.

Sammie