That sounds like the twin of the engine I'm building with the exception that I am runnig a 78.4mm stroke CB crank which gives it a 2017cc displacement. I'll be running an Engle 110 cam and probably run a lighter clutch too...not going to be drag racing the bus anytime soon. -Dan Sent via BlackBerry by AT&T -----Original Message----- From: Mark Sawyer <mechmark@xxxxxxxxxxxxx> Date: Tue, 22 Apr 2008 12:03:40 To:tcb@xxxxxxxxxxxxx Subject: [tcb] Re: hp Engine configuration: 90.5 x 78 stroke 044 super mag head Scat C25 cam Dual 40 IDF Webers windage tray solid rocker shafts, stock rockers, chromoly push rods ported and polished. Full flow exhaust. horsepower is a calculated estimate at 140hp Also running a Kennedy 3500 lb pressure plate with solid clutch disc. (hard on the knee, not a clutch for traffic) sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: Mark Sawyer: We were talking about a 2007cc stroker motor at the Classic and our conversation got interupted and I forgot what you said about configuration and horse power. Exactly how did you have this engine set up in terms of heads, cam, and carbs and did you dyno it at the crank or the wheels, and how much horse power did you say that it turned out? I'm trying to get a guess ti mate of how much mine is turning with an Engle 110, Weber 34s and CB 044 heads. My guess right now is 110-120. Sammie