[tcb] Re: how do you get the thingee's out of the case
- From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Tue, 29 Apr 2008 09:32:12 -0500
leave it to old men to start a conversation about removing case studs and
change it into a conversation about golf
golf sucks
From: whocanduncan@xxxxxxxxxxx
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: how do you get the thingee's out of the case
Date: Tue, 29 Apr 2008 09:12:33 -0500
I wasn't sure he was taking about golf?
Date: Tue, 29 Apr 2008 06:36:12 -0700
From: mechmark@xxxxxxxxxxxxx
Subject: [tcb] Re: how do you get the thingee's out of the case
To: tcb@xxxxxxxxxxxxx
There were those VW powered golf carts at the classic.
sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: Chuck: Have a birdie on
me. It would probably help if you drove the blue bus to the golf course (bus
content).
chuck blue <sukchew@xxxxxxxxxxxxxx> wrote: I'm going to try for some
outcome today.I'm sure it will be there .I just don't know the execution will
be. ----- Original Message ----- From: sammie smith To:
tcb@xxxxxxxxxxxxx Sent: Monday, April 28, 2008 7:42 PM Subject: [tcb] Re:
how do you get the thingee's out of the case
Chuck: As they say on the golf course: It ain't the execution it's the
outcome.
chuck blue <sukchew@xxxxxxxxxxxxxx> wrote: Sometimes you do what you have
to do.You don't get points for pretty. ----- Original Message ----- From:
sammie smith To: tcb@xxxxxxxxxxxxx Sent: Monday, April 28, 2008 4:30 PM
Subject: [tcb] Re: how do you get the thingee's out of the case
You use a pipe wrench on a piece of elaborate German engineering?
Brian Denning <i_am_cool_fred@xxxxxxxxxxx> wrote: if you plan on using
new studs a pipe wrench works good
Date: Mon, 28 Apr 2008 11:55:43 -0700
From: mechmark@xxxxxxxxxxxxx
Subject: [tcb] Re: how do you get the thingee's out of the case
To: tcb@xxxxxxxxxxxxx
That's exactly how I would explain and and how I get the studs out as well. In
a pinch I have used Vice Grips.
sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: Have you thought of two
nut jam method. Uh how do explain this. Run one nut on, run another nut on.
Tighten them
together. Screw out the inner nut. Will remove a stud everytime. Mark or
Will may have a better way to explain to a VW nut how to use the jam nut method
to remove a stud. I just thought every VW nut knew how to use nuts for studs.
Or is that a VW stud using nuts. Anyway, you get the meaning.
Trey Jung <treyjung@xxxxxxxxxxx> wrote: got a 1600 case that I am
bumping into all the time b/c it has the rods sticking out of the case that the
cylinders slide onto (heads bold on to them I think too)..... is there a secret
to getting these things out of the case. ( I want to put the case on a shelf
but these things make too wide to fit... I tried a pair of pliers but they seem
to be really in the case. Thanks
Express yourself wherever you are. Mobilize!
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.5/1401 - Release Date: 4/28/2008 7:18
AM
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.5/1401 - Release Date: 4/28/2008 7:18
AM
Express yourself wherever you are. Mobilize!
_________________________________________________________________
Express yourself wherever you are. Mobilize!
http://www.gowindowslive.com/Mobile/Landing/Messenger/Default.aspx?Locale=en-US?ocid=TAG_APRIL
Other related posts:
