No problem. Are you going to make it down for Sammie's show in Nac. I am going to be bringing a few extras there to sell. If there is anything anyone needs let me know and I will bring it along. ----- Original Message ----- From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Wednesday, January 21, 2009 3:22:07 PM GMT -06:00 US/Canada Central Subject: [tcb] Re: hershey is on his last limb...i think thank you mark, i actually just scored a set of brand new dual port heads for $200 that i can pick up tomorrow and pay out as money rolls in but, i will defintately hit you up this summer/fall on one of those universal cases. and maybe some heads then. (i plan on building a 2156 then) Date: Wed, 21 Jan 2009 01:44:41 +0000 From: mechmark@xxxxxxxxxxx To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: hershey is on his last limb...i think I have dual port heads rebuilt and ready to run. new guides were installed where needed. $100.00 per head. Let me know if you need 1 or 2. Mark ----- Original Message ----- From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Tuesday, January 20, 2009 6:29:05 PM GMT -06:00 US/Canada Central Subject: [tcb] hershey is on his last limb...i think i pulled the heads off to replace the pushrod tubes and noticed that i have a crack on number 3. the bus has been running fine all this time. the crack goes from intake to exhaust valves. a friend suggested to put it on the opposite side so it is the coldest cylinder in the motor and milk it this year...i'm afraid to does anyone have a dp head for cheap ready to run??? i don't want to cheese it but, i don't want to spend a ton of money. lemme know brian also, what do you think about the milking it idea??? how long would that head last? i've pulled motors apart before with cracks worse than that. how long do you think it lasted? do i really need a head? Windows Live™: Keep your life in sync. Check it out. Windows Live™ Hotmail®…more than just e-mail. See how it works.