Eric you'll moving back?
From: "Eric Woodall" <eric@xxxxxxxxxxxxxx>
Subject: [tcb] Re: hershey is fixed
Date: Thu, 11 Jan 2007 10:14:43 -0600 (CST)
>Jeff, where on the west side do you live?
>We are looking at property in the Dripping Springs area...
> > I am in Austin, my office is in South Austin and I live in West Austin.
> > ----- Original Message ----
> > From: Eric Woodall <eric@xxxxxxxxxxxxxx>
> > To: tcb@xxxxxxxxxxxxx
> > Sent: Thursday, January 11, 2007 10:04:24 AM
> > Subject: [tcb] Re: hershey is fixed
> > Mark, Jeff is in Austin.
> >> Jeff, Where are you located at??
> >> ATX BUS <atx_bus@xxxxxxxxx> wrote: Brian and fellow TCBers
> >> I will be pulling my engine soon to install a new gas tank. I also
> >> have
> >> some oil leak issues that I am going to resolve. Where did you purchase
> >> the new gaskets(german seals)?
> >> This will be my first time to pull this engine, and quite possibly the
> >> first time it has been removed since it's manufacturing. I have a '67
> >> with the stock 1500cc. Any other words of advice would be greatly
> >> appreciated.
> >> Jeff
> >> PS I have changed my email for TCB related issues, atx_bus is the bus
> >> driver formerly known as brunson_dds
> >> ----- Original Message ----
> >> From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx>
> >> To: tcb@xxxxxxxxxxxxx
> >> Sent: Thursday, January 11, 2007 8:56:39 AM
> >> Subject: [tcb] hershey is fixed
> >> my top secret work is now finished. so now i can tell you what
> >> happened.
> >> i
> >> tood the fan shroud off to fix a minor oil leak. when i say minor i mean
> >> a
> >> half a quart in a weeks worth of driving. the cooler seals were leaking.
> >> so
> >> i went to take off the dang cooler stand (dog house) and ripped a bolt
> >> head
> >> off. the damn thing broke flush, it blended in with the case, couldn't
> >> find
> >> the bolt at all. well i brought in a pro...my dad. he managed to find it
> >> drill it out, and retap the hole. all being done really carefully so no
> >> shavings will get in the motor.
> >> so what was the leak you ask? well, a combination of things, a missing
> >> bolt
> >> and dried crusty cracked gaskets (cheapies evidently). so the solution:
> >> german seals, yes they make them, didn't know they did but they do, and
> >> properly torqued bolts (all six of them).
> >> all i lack to having him running are tightening the mustache bar bolts
> >> (where it mounts to the body) and carb bolts, hooking up the oil light
> >> and
> >> coil wire, and feeding and hooking up the throttle cable.
> >> this weekend, before i even crank it i am going to change the oil just
> >> incase there were any shavings in the case. and put on my new sump plate
> >> to
> >> fix that leak.
> >> one problem i am having though. the passenger side valve cover bail is
> >> loose, i have replaced it twice with og bails and the thing is so loose
> >> i
> >> can pop it off with my bare hand. what is a solution to that? that is
> >> the
> >> only place left for a leak.
> >> _________________________________________________________________
> >> The MSN Entertainment Guide to Golden Globes is here. Get all the
> >> scoop.
> >> http://tv.msn.com/tv/globes2007/?icid=nctagline2
> >> ---------------------------------
> >> Access over 1 million songs - Yahoo! Music Unlimited.
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com