Well, if you weren't going to Blue Man Group Concerts and Ikea, then you could fix your bus.. ;-) -----Original Message----- >From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx> >Sent: Oct 16, 2006 11:53 AM >To: tcb@xxxxxxxxxxxxx >Subject: [tcb] electrical issues > >so i was telling will this saturday night. and he laughs because evidently >all bays are crazy like this but i thought i would share th story > >hershey has had an eletcrical problem for a while now. everytime you hit a >bump he dies. then i reach down and tap the fuse panel a couple of times and >he fires back up lets out a big BOOOM!!! and we're off again. > >well due to the p/o's p/o there has been some crazy engineering done to the >electrical system. fuses used as clamps to hold wires in place so...i >decided it is time to clean up the rats nest. so i pulled the fuse panel >out...which was held in place by two zip ties. and went to work, constantly >check my bently diagrams. i get it all cleaned up looks beautiful under the >dash wires tied up and secure taped together so they don't dangle and bind >in other parts of the bus (windshield wiper motor in particular). looks >really good. so i hook up the battery and the damn parking lights come on. >the switch isn't on but the lights are on. ok i can address that i will just >get out the test light. well i have juice to a wire that should only have >juice when the switch is on. can't figure it out. well i can fix that later >lets see if she starts, and see if the loose connection problem is taken >care of. i turn the key on, nothing, no lights, no sounds, nothing.hmmm.... >lets see if the headlight switch will turn on the headlights. WTF?!?! now i >have dash lights such as the oil preassure light and the battery light. and >it starts up. i turn off the lights and the motor dies. > >wierd...i know. so i pull the column again, pull the fuse panel again, and >pull the light switch. hmmm. i hook the battery up and nothing no lights. i >turn the lights on and nothing, no lights. but i hear a bit of a noise >commign from the dash every time i touch the column. AHH HA!!! the positive >wire that goes from the solenoid to the light switch was loose the entire >time and that is what was causing the damn thing to die when i flash my >lights to signal truckers over. well problem was fixed on friday and today, >maybe, i will button everything up and start working on heater cables. > >it's absolutely amazing that a wire going to the light switch would cause >the damn thing to die and not run sometimes as well. > >thank god for the bently book that helped me out 100% > >_________________________________________________________________ >Get FREE company branded e-mail accounts and business Web site from >Microsoft Office Live >http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/ > >