[tcb] Re: brake parts needed

Mark, I might have the brake parts. I'll check this afternoon.


-----Original Message-----
From: sammie smith <bugcollections@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tue, Aug 25, 2009 10:20 pm
Subject: [tcb] Re: brake parts needed






Also the brake parts for a big nut are much easier to find.

--- On Tue, 8/25/09, mechmark@xxxxxxxxxxx <mechmark@xxxxxxxxxxx> wrote:


From: mechmark@xxxxxxxxxxx <mechmark@xxxxxxxxxxx>
Subject: [tcb] Re: brake parts needed
To: tcb@xxxxxxxxxxxxx
Date: Tuesday, August 25, 2009, 5:02 PM




Good point. What year did they change to the big nut trans???

?


----- Original Message -----
From: "sammie smith" <bugcollections@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, August 25, 2009 4:54:34 PM GMT -06:00 US/Canada Central
Subject: [tcb] Re: brake parts needed







That's not a 59 tranny then.? If converted you need to find out what year model 
all of that stuff is to find the correct brake part.? I would assume when they 
converted to big nut from a 59 tranny they converted the brakes parts to the 
later style.


--- On Tue, 8/25/09, mechmark@xxxxxxxxxxx <mechmark@xxxxxxxxxxx> wrote:



From: mechmark@xxxxxxxxxxx <mechmark@xxxxxxxxxxx>
Subject: [tcb] Re: brake parts needed
To: tcb@xxxxxxxxxxxxx
Date: Tuesday, August 25, 2009, 4:37 PM




46mm axle nut.

?


----- Original Message -----
From: "w.wood" <evil.scientist.boo@xxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, August 25, 2009 3:38:29 PM GMT -06:00 US/Canada Central
Subject: [tcb] Re: brake parts needed



For small nut or big nut application?

?

The treasure chest prop's are being repopped..? Say that 10 times fast.? The 
props are being repopped... LOL? just check thesamba classifieds.? Frankly I'd 
go repop unless you can find a nice OGHEEE one.

?

?



?

On Tue, Aug 25, 2009 at 3:59 PM, <mechmark@xxxxxxxxxxx> wrote:




I'm doing a mechanical restoration on a 59 single cab and need some brake 
parts. the parts that are missing are the drivers side rear parking assembly. 
the actuating arm, cross arm and cross arm clip. I would prefer to find a 
complete backing plate with everything attached if any one has one. If not I 
will try to piece it together. 

?

I also need the arm that holds the treasure chest door open if anyone has that 
also.

?

Let me know what you have and how much.

?

Thanks,

Mark










-- 
My Email Moniker ?
http://www.findinternettv.com/Video,item,1570570433.aspx

Other related posts: