[tcb] Re: Wiring mess - I need help!

http://www.thesamba.com/vw/archives/info/wiringt2.php
  Eric try this link or print the attachment.I used these to wire my 61

Eric Woodall <eric@xxxxxxxxxxxxxx> wrote: 
  Well, coming along nicely.
The gas gauge was not grounded well enough, causing the Pegging full 
when dimmer on.
Now, I just need some bulbs...
Bulbs, bulbs, anyone?


Eric Woodall wrote:

> I think I need a couple of bulbs.
> I need one of the small ones for the oil light and one of the larger 
> ones for the turn signal bulbs.
> Can these be gotten at the FLAPS or do I need to go to KAR parts 
> tomorrow?
>
>
> Eric Woodall wrote:
>
>> Ok.
>> Almost got it. So far this is what does work:
>> 1) Outside blinkers front and rear, left and right
>> 2) Hazard lights (all), and interior hazard bulb on dash.
>>
>> What doesn't work:
>> 1) Blinker bulbs on speedo.
>> 2) When dimmer on dash lights is turned on full blast the gas gauge 
>> reads full, and when turned off the gas gauge goes back to the 
>> correct place.
>>
>> I think I still need help. Anybody in Houston free tomorrow evening?
>>
>>
>> Eric Woodall wrote:
>>
>>> Can Anybody help me with my 12 volt 9 pin relay box?
>>> I cannot seem to get everything wired up correctly, and I need to 
>>> get my bus over to the upholsterer pretty soon.
>>> I usually have the patience to fix these kinds of things, but this 
>>> thing has me messed up...
>>> Like Will says, "Your in the clutches of the 9 pin relay box!"
>>>
>>> HELP!
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
>




image/pjpeg

Other related posts: