Agreed. Por-15 has worked well for me. Problem is that I cannot get inside the rocker assembly, hence the spray criteria. Kirk wrote: > I swear by POR 15, available locally in Dallas. I did the pans of the > Super several years ago because I found a small spot under the battery > tray. I followed the directions, scraped the loose rust off, cleaned > it, and painted it. It hasn't budged since. I did end up with it on my > forehead, and had to sand (yes I said sand) it off. I dont think it > comes in a spray, but its the best thing I have ever used. I think > spray primers and the like just trap mostiure, not prevent rust. > > > --- On *Mon, 2/23/09, Eric Woodall /<eric@xxxxxxxxxxxxxx>/* wrote: > > From: Eric Woodall <eric@xxxxxxxxxxxxxx> > Subject: [tcb] Re: Rust.... preventative > To: tcb@xxxxxxxxxxxxx > Date: Monday, February 23, 2009, 9:12 AM > > Thanks sammie. > I've read Lee's article several times. > Basically what he is saying is that they are all a crock of $h1T in > regards to "encapsulation". > So, probably my best bet is to either get some master's series, or some > rustoleum spray paint. > I really need something that is in an aerosol can, to spray the inside > of the rocker assembly. > Mainly I just wanted to see if you guys were familiar with any products > that maybe nobody else has. > I just mainly don't want to be redoing this in another 10 years... > > > sammie smith wrote: > > Go here. > > http://www.thesamba.com/vw/forum/viewtopic.php?t=131753 > > > > --- On *Sun, 2/22/09, Eric Woodall /<eric@xxxxxxxxxxxxxx>/* wrote: > > > > From: Eric Woodall <eric@xxxxxxxxxxxxxx> > > Subject: [tcb] Rust.... preventative > > To: "Texas Coalition of Buses" <tcb@xxxxxxxxxxxxx> > > Date: Sunday, February 22, 2009, 2:02 PM > > > > Hey bus lovers, > > I am about to do some rust work on my bus and I have some questions. > > The first thing I'm going to do is the short rocker under the > cargo doors. > > I bought an assembled piece for Kelly (metalwizard) several years > ago, > > but the inner part is not painted or anything. > > I need a rust preventative that I can get locally (preferred) that I > can > > spray, or pour into one end of the rocker assembly, and coat the > inside. > > The goal here is to not have to do this again in 10 years. > > Something like POR-15 won't work because of the priming of the > metal, etc. > > So what's the verdict? > > Thanks! > > Eric > > > > > > > > > > > > > >