[tcb] Re: Rust.... preventative
- From: James Dwan <james_dwan_2000@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 23 Feb 2009 16:46:33 -0800 (PST)
ahhhahahaha Kirk sand papered his forehead LOL!
--- On Mon, 2/23/09, Kirk <slammedcustom@xxxxxxxxx> wrote:
From: Kirk <slammedcustom@xxxxxxxxx>
Subject: [tcb] Re: Rust.... preventative
To: tcb@xxxxxxxxxxxxx
Date: Monday, February 23, 2009, 9:32 AM
I swear by POR 15, available locally in Dallas. I did the pans of the Super
several years ago because I found a small spot under the battery tray. I
followed the directions, scraped the loose rust off, cleaned it, and painted
it. It hasn't budged since. I did end up with it on my forehead, and had to
sand (yes I said sand) it off. I dont think it comes in a spray, but its the
best thing I have ever used. I think spray primers and the like just trap
mostiure, not prevent rust.
--- On Mon, 2/23/09, Eric Woodall <eric@xxxxxxxxxxxxxx> wrote:
From: Eric Woodall <eric@xxxxxxxxxxxxxx>
Subject: [tcb] Re: Rust.... preventative
To: tcb@xxxxxxxxxxxxx
Date: Monday, February 23, 2009, 9:12 AM
Thanks sammie.
I've read Lee's article several times.
Basically what he is saying is that they are all a crock of $h1T in
regards to "encapsulation".
So, probably my best bet is to either get some master's series, or some
rustoleum spray paint.
I really need something that is in an aerosol can, to spray the inside
of the rocker assembly.
Mainly I just wanted to see if you guys were familiar with any products
that maybe nobody else has.
I just mainly don't want to be redoing this in another 10 years...
sammie smith wrote:
> Go here.
> http://www.thesamba.com/vw/forum/viewtopic.php?t=131753
>
> --- On *Sun, 2/22/09, Eric Woodall /<eric@xxxxxxxxxxxxxx>/* wrote:
>
> From: Eric Woodall <eric@xxxxxxxxxxxxxx>
> Subject: [tcb] Rust.... preventative
> To: "Texas Coalition of Buses" <tcb@xxxxxxxxxxxxx>
> Date: Sunday, February 22, 2009, 2:02 PM
>
> Hey bus lovers,
> I am about to do some rust work on my bus and I have some questions.
> The first thing I'm going to do is the short rocker under the
cargo doors.
> I bought an assembled piece for Kelly (metalwizard) several years ago,
> but the inner part is not painted or anything.
> I need a rust preventative that I can get locally (preferred) that I
can
> spray, or pour into one end of the rocker assembly, and coat the
inside.
> The goal here is to not have to do this again in 10 years.
> Something like POR-15 won't work because of the priming of the
metal, etc.
> So what's the verdict?
> Thanks!
> Eric
>
>
>
>
Other related posts:
