[tcb] Re: I Got Dem Old Dog House Oil Cooler Blues
- From: Will Wood <evilscientistboo@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Sun, 27 Apr 2008 18:59:45 -0400 (EDT)
Either Way, I'll give you a shout.
-----Original Message-----
>From: Neil <nbmdude@xxxxxxxxx>
>Sent: Apr 27, 2008 6:46 PM
>To: tcb@xxxxxxxxxxxxx
>Subject: [tcb] Re: I Got Dem Old Dog House Oil Cooler Blues
>
>Will, you're the best! Would it be better for me to
>come to your house?
>Until I start back up on work hardening, I have way
>too much free time...
>Thanks man!
>--- Will Wood <evilscientistboo@xxxxxxxxxxxxx> wrote:
>
>> Their are three pieces of removable tin around the
>> doghouse.
>>
>> The Rear Deflector, the "hoover bit" and the exhaust
>> tin which goes through the breastplate.
>>
>> The fixed portion that's part of the shroud directs
>> the air. It doesn't unbolt.
>>
>> Basically if you have Tin sections from the doghouse
>> missing or falling off the engine will run warmer
>> but it'll be safe to drive. Just don't go rolling
>> through the Sahara in July.
>>
>> If I get a chance this week, I can probably roll by
>> and hook it back up. You can
>> get to the 10mm nuts when the engine is installed.
>> I just takes 9 foot long arms.
>>
>>
>>
>>
>> -----Original Message-----
>> >From: Neil <nbmdude@xxxxxxxxx>
>> >Sent: Apr 27, 2008 3:26 PM
>> >To: tcb@xxxxxxxxxxxxx
>> >Subject: [tcb] I Got Dem Old Dog House Oil Cooler
>> Blues
>> >
>> >I was checkin' the oil yesterday, noticed that the
>> >tinware for the dog house oil cooler was layin' in
>> the
>> >engine compartment...the part that attaches to the
>> >shroud and covers the cooler.
>> >I know its a forced air coolin' system...my
>> question
>> >is, would it be safe to drive it 20 minutes to
>> >Qualitat?
>> >Due to neck, shoulder and lower back injuries, I
>> can't
>> >pull the motor myself to fix it.
>> >Which forces me to take 'er to the shop...
>> >Will I screw up the motor via over heatin' with a
>> >short drive?
>> >This bein' injured is gettin' more expensive by the
>> >day!
>> >Anyone tried fixin' a situation like this w/out
>> >pullin' the motor? How difficult...I ain't too
>> >flexible these days...
>> >
>> >Kinda wonder where the bolts holdin' it on ended
>> up!
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>____________________________________________________________________________________
>> >Be a better friend, newshound, and
>> >know-it-all with Yahoo! Mobile. Try it now.
>>
>http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>> >
>>
>>
>>
>
>
>
>
> ____________________________________________________________________________________
>Be a better friend, newshound, and
>know-it-all with Yahoo! Mobile. Try it now.
>http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
Other related posts:
