Just watch the thickness of the glass you order. I made that mistake once. Eric Woodall <eric@xxxxxxxxxxxxxx> wrote: Yeah, it sure does Mark! I am still gathering parts, so when I get that all done and new glass cut I will plan something out... It looks like after I have everything disassembled, it shouldn't be too difficult to get at the rivets with some tools. > Sounds like the beginning of a work weekend at Eric's > > Eric Woodall wrote: Hey everyone, > I know there are some Westy freaks on this list so... > I recently acquired some original jalousie windows (thanks Peter!), and I > have some questions about some different aspects of putting them together. > > 1) Some of the clips that hold the windows in need to be repaced. These > are riveted together, and I am going to need to drill out the rivets. Is > there a certain tool that I should use to put the new rivits in? > > 2) I also need to replace the mesh screen on the screen frames. Is there > some type of window company that should be able to do this? > > I can tell already that this is going to be a lot of work to get 6 working > windows, but it will be soooo nice to have them installed in the bus. > I can't wait! > > > >