LOL, thanks Sharon! > I don't know how to fix the windows, we have 3 cranks that don't work > anymore, but I did our screens with just home depot metal screening, I > think > they just have the rubber insert you mash with a screen tool into the > groove > like normal screens, Eric it must be easy if I did it. > > -------Original Message------- > > From: Eric Woodall > Date: 1/2/2007 9:10:19 AM > To: tcb@xxxxxxxxxxxxx > Subject: [tcb] Hehr Jalousie Window Restoration Questions. > > Hey everyone, > I know there are some Westy freaks on this list so... > I recently acquired some original jalousie windows (thanks Peter!), and I > have some questions about some different aspects of putting them > together. > > 1) Some of the clips that hold the windows in need to be repaced. These > are riveted together, and I am going to need to drill out the rivets. Is > there a certain tool that I should use to put the new rivits in? > > 2) I also need to replace the mesh screen on the screen frames. Is there > some type of window company that should be able to do this? > > I can tell already that this is going to be a lot of work to get 6 > working > windows, but it will be soooo nice to have them installed in the bus. > I can't wait! > >