Have a look see at these pictures and if this helps you: http://www.woodallweb.com/gallery/main.php/v/album03/Bus_RGB_Rebuild/ FYI, I didn't take these pictures. This is what I used to do the rebuild on mine. wuzmop@xxxxxxx wrote: > Can you describe it for me as if I'm a bonehead? The things I've > looked up imply I need a bearing puller but if you can tell me how to > get the axles off without that it would go along way in solving my > dilemma! > > Sent via BlackBerry from T-Mobile > > ------------------------------------------------------------------------ > *From*: Eric Woodall > *Date*: Wed, 13 May 2009 11:58:39 -0500 > *To*: <tcb@xxxxxxxxxxxxx> > *Subject*: [tcb] Re: Fun with Redux Boxes > I was able to get my reduction boxes off of the transaxle without a press. > Do you mean you need a press to rebuild the redution boxes? > You could remove the axles and the axle tubes and then take your > transaxle center section that place that Sammie uses in Longview. > This might work right? > > wuzmop@xxxxxxx wrote: >> As some of you know I blew out 4th gear on the way to the classic. >> 1967 with big nut redux boxes. I'm weighing my options as every time >> I think I'm leaning in a specific direction, I run into a challenge. >> Keeping in mind I've had a string of bad luck with our regular car >> getting wrecked while we were in Fburg and some other realted issues >> have me kinda strapped for now, so cost is a huge factor. Time is >> only a factor because I miss my bus, AND IT'S CAMPING SEASON! I know >> I can search the web, but honestly I'm a bit frustrated so I'm hoping >> you guys can help, and I value your input. >> >> Option A) How much can I expect to pay to have my tranny rebuilt >> locally, stock, if I drag it to them with the redux boxes intact. I >> don't have the pullers to get the bearings off to get the axles off. >> With Graffeo out of the mix, who? And who close to Dallas? I have no >> truck or big car to move this thing with. I can get help, but >> wouldn't want to ask them to go too far. >> >> Option B) I have a small nut drum to drum, I'm told is good, I can >> slip in there for now until my funds get in better shape. It's got a >> rusted nut in the redux housing that so far won't budge. Back to that >> I have no way to remove the housing to stick another on there if I >> could. >> >> Option C) How much and to what lengths would I have to go to to put >> in a straight axle kit and do away with the boxes? I don't want to do >> this, and if I do, the bus will be down for awhile, especially if it >> would require any more than just the tranny axles and drop spindles. >> >> I'm taking a deep breath now... >> >> ------------------------------------------------------------------------ >> Dell Mini Netbooks: Great deals starting at $299 after instant >> savings! >> <http://pr.atwola.com/promoclk/100126575x1221972443x1201442012/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B214819441%3B36680237%3Bi> >> >