[tcb] Re: Front door hard to open
- From: "chuck blue" <sukchew@xxxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Thu, 4 Dec 2008 17:53:29 -0600
Lubricate the striker and adjust the sealing rubber.
----- Original Message -----
From: treyjung
To: tcb@xxxxxxxxxxxxx
Sent: Thursday, December 04, 2008 4:41 PM
Subject: [tcb] Front door hard to open
On my bus when I pull on the inside release lever to get out - I have to bump
the door to get out of the bus - I pulled the panel off and bent the connected
rod using 2 pliers and its not really better. Wondering if I need to bend the
heck out of it to get it to release better? Or is it the lock cylinder /
mechanism I need to clean up or oil again.
Sugestions?
Trey
Other related posts:
