[tangousers] Re: Test Message

  • From: John McClain <john@xxxxxxxxxxxxxxxxxxxxx>
  • To: tangousers@xxxxxxxxxxxxx
  • Date: Thu, 23 Feb 2017 19:26:18 -0800

I have some more tech info at the studio, will check tomorrow. John

John McClain The Dog and Pony Show @DnPSound 3395 S. Jones Blvd. #328 Las 
Vegas, NV 89146 702-252-0251 [tel:702-252-0251] Land 702-252-0265 
[tel:702-252-0265] Fax 702-612-3098 [tel:702-612-3098] Mobile 
John@xxxxxxxxxxxxxxxxxxxxx www.dogandponystudios.net
On Thu, Feb 23, 2017 at 3:57 PM, Contact (Rav Sound Solutions) 
<contact@xxxxxxxxxxxx> wrote:
Really interested on this also.
Thanks.
Best.

Enviado desde mi dispositivo movil
El 23 feb 2017, a las 23:54, Ryan Clark < purpaleremixed@xxxxxxxxx 
[purpaleremixed@xxxxxxxxx] > escribió:

Anyone know how to reformat the tango?
On Feb 23, 2017 2:40 PM, "peregrine andrews" < pez@xxxxxxxxxxxxxx 
[pez@xxxxxxxxxxxxxx] > wrote:
Thanks everyone! I do prefer the idea of keeping this beauty going to 
abandoning it.



Peregrine Andrews Moving Air
Audio Production tel 07976 267154 www.moving-air.com 
[http://www.moving-air.com/]
IMDB [http://www.imdb.com/name/nm1910148/?ref_=fn_al_nm_1]
AMPS [http://www.amps.net/directory/peregrine-andrews] @pezzatronic ;
[https://twitter.com/pezzatronic]
On Thu, Feb 23, 2017 at 7:56 PM, John McClain < john@xxxxxxxxxxxxxxxxxxxxx 
[john@xxxxxxxxxxxxxxxxxxxxx] > wrote:
Here's a link to a PDF I received from SmartAV a couple of years ago with 
instructions for opening the console and working on it, if memory serves this 
is how you access the faders. Hope it's helpful! john.
http://client.dogandponystudios.net:8000/_gI1hgBVdsElBoR ;
[http://client.dogandponystudios.net:8000/_gI1hgBVdsElBoR]


John McClain
The Dog and Pony Show @DnPSound
3395 S. Jones Blvd. #328
Las Vegas, NV 89146
702-252-0251 [tel:(702)%20252-0251] Land
702-252-0265 [tel:(702)%20252-0265] Fax
702-612-3098 [tel:(702)%20612-3098] Mobile
john@xxxxxxxxxxxxxxxxxxxxx [john@xxxxxxxxxxxxxxxxxxxxx]
www.dogandponystudios.net [http://www.dogandponystudios.net]

On Thu, Feb 23, 2017 at 10:09 AM, peregrine andrews < pez@xxxxxxxxxxxxxx 
[pez@xxxxxxxxxxxxxx] > wrote:
Hi,
Two sticky faders. That's still an issue - I have to give them a tap to make 
them show the right position. That's become a show-stopper. Also, I'd now like 
to be able to use it with Pro Tools and maybe Reaper, as well as Nuendo. I also 
have a Euphonix artist MC. No way as beautiful, but currently more usable than 
the beloved Tango. So, anyone on the market for a Tango 1 with two misbehaving 
faders? Or should I keep the faith....if I could fix the faders that would be a 
start.
Cheers
P.

Peregrine Andrews Moving Air
Audio Production tel 07976 267154 [tel:07976%20267154] www.moving-air.com 
[http://www.moving-air.com/]
IMDB [http://www.imdb.com/name/nm1910148/?ref_=fn_al_nm_1]
AMPS [http://www.amps.net/directory/peregrine-andrews] @pezzatronic ;
[https://twitter.com/pezzatronic]
On Thu, Feb 23, 2017 at 4:51 PM, John < hodgkinson.john@xxxxxxxxx 
[hodgkinson.john@xxxxxxxxx] > wrote:
Can't solve your problem but you are reaching the group

When in doubt............Seduce!
On Feb 23, 2017, at 10:42 AM, John McClain < john@xxxxxxxxxxxxxxxxxxxxx 
[john@xxxxxxxxxxxxxxxxxxxxx] > wrote:

Received.

John McClain The Dog and Pony Show @DnPSound 3395 S. Jones Blvd. #328 Las 
Vegas, NV 89146 702-252-0251 [tel:702-252-0251] Land 702-252-0265 
[tel:702-252-0265] Fax 702-612-3098 [tel:702-612-3098] Mobile 
John@xxxxxxxxxxxxxxxxxxxxx [John@xxxxxxxxxxxxxxxxxxxxx] 
www.dogandponystudios.net [http://www.dogandponystudios.net]
On Thu, Feb 23, 2017 at 7:33 AM, peregrine andrews < pez@xxxxxxxxxxxxxx 
[pez@xxxxxxxxxxxxxx] > wrote:
Can any Tango users reply so I know this is reaching the group? I've sent a few 
messages before and had no replies.
Cheers
Pez

Peregrine Andrews Moving Air
Audio Production tel 07976 267154 [tel:07976%20267154] www.moving-air.com 
[http://www.moving-air.com/]
IMDB [http://www.imdb.com/name/nm1910148/?ref_=fn_al_nm_1]
AMPS [http://www.amps.net/directory/peregrine-andrews] @pezzatronic ;
[https://twitter.com/pezzatronic]

Other related posts: