[studiorecorder] Re: choosing mono as the default
- From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
- To: <studiorecorder@xxxxxxxxxxxxx>
- Date: Mon, 11 May 2015 07:57:31 +0700
Thank you.
Cuong.
----- Original Message -----
From: "Mary Emerson" <maryemerson@xxxxxxxxxxxxx>
To: "Studio Recorder" <studiorecorder@xxxxxxxxxxxxx>
Sent: Monday, May 11, 2015 2:26 AM
Subject: [studiorecorder] choosing mono as the default
Press alt to get into the menu.
Then press right arrow to get to options and press enter on that.
When the options menu comes up, up or down arrow to default wave format,
and press enter..
When the dialog comes up, tab a few times to get to select wave format;
there are two radio buttons; press up or down arrow to choose mono. Make
sure the button is checked.
Tab to the ok button and activate it. I usually just press enter on it.
You should be back in the main program.
Mary
-------------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
74/17 Bui Quang La, ward 12, Go Vap Dst, HCMC, Vietnam
Tel: +84862573309
E-mail: vanphong@xxxxxxxxxxxxxxxxxx; congnghe@xxxxxxxxxxxxxxxxxx
Facebook:
https://www.facebook.com/SaoMaiCenter
Website:
http://www.trungtamsaomai.org;
http://www.saomaicenter.org
Mobile / Zalo: +84 902-572-300
E-mail: dangmanhcuong@xxxxxxxxx; cuong@xxxxxxxxxxxxxxxxxx
Yahoo! ID: manhcuong0312
Skype name: dangmanhcuong
facebook:
http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
Website:
http://ngoisaodanduong.com
Projec-Website:
http://dangmanhcuong.googlecode.com
Other related posts: