[studiorecorder] Re: How To Extract Out One Channel In A Stereo Recording
- From: "Neal Ewers" <neal.ewers@xxxxxxxxxxxxxx>
- To: <studiorecorder@xxxxxxxxxxxxx>
- Date: Wed, 24 May 2006 13:11:20 -0500
Ah, Rob, this is something else I have forgotten to ask for. I'm going
to be embarrassed if SR already has it.
Sound Forge, I should stop mentioning that beast on this list, has an
ability to select mono both with the extra benefit of telling it which
channel or channels you want to use. This comes in handy in something
like the situation in the message below, or when I record only in one
channel of my recorder for a mono recording and the other channel
contains the hiss of the mike pre-amp with no mike plugged into it. So,
it would be nice, in my example, to only have the left channel be used
as the mono channel because I would not be picking up the extra hiss.
Sometimes you may want the right channel and sometimes both in the mono
end result.
Neal
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of
Mika_Pyyhkala@xxxxxxx
Sent: Wednesday, May 24, 2006 12:47 PM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] How To Extract Out One Channel In A Stereo
Recording
Hi,
I recorded a presentation using an Iriver IFP899 in 96K stereo mp3, and
now I have the file in Studeo Recorder.
One of the channels (right) side sounds very good, but the left side you
can barely hear anything. Is there a way to extract the right channel
so
that I could use that one, and discard the poorer sounding left channel.
FYI in the end a mono recording will be fine we don't need stereo in the
final mp3 to be released.
Thank you,
Mika
Other related posts:
