Curtis, even though I didn't highlight any part of the recording, I think
you have to be right. Some how there was something that had to be
highlighted, or none of this would have happened. Good suggestion about
always pressing c before recording.
Neal
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Curtis Delzer
Sent: Saturday, April 11, 2015 1:42 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Frustrated with studio recorder
sorry Neil, I've never had any issues with a recording which suffered
because one file was of a particular length and the second therefore was
limited, only by having the end highlighted accidently in any way has it
ever happened for me.
-----
Curtis Delzer, HS.
K6VFO
San Bernardino, CA
On Fri, 10 Apr 2015 23:54:37 -0500
"Neal Ewers" <neal.ewers@xxxxxxxxxxxxxx> wrote:
Mary, I use wave view also and have never had that problem. The thingnice if we knew how it was solved.
is, if there were something else effecting my computer, I am not sure
why several times now the second recording I started over by moving to
the top of the file will record exactly the length of the first file.
I know that if this first file is highlighted, it will likely happen,
but nothing is highlighted when this happens. I am glad your problem
was solved by who knows what. And that's just the problem. If would be
mode.
Thanks for writing.
Neal
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Mary Emerson
Sent: Friday, April 10, 2015 11:16 PM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Frustrated with studio recorder
Neal and list,
I had a similar thing happen for a couple years, but it stopped
happening early this year. It hasn't happened in the past couple months.
I don't know if this is due to software changes on my hard drive; or
maybe something interfered with SR as it was running. I definitely
wouldn't wish this problem on anyone.
I've noticed something annoying; this doesn't relate to Neal's
problem, but I'll mention it in case someone notices it. I use SR in wave
Sometimes while editing, I notice that the phrase I'm working with
suddenly repeats quickly and briefly, and the entire phrase isn't
spoken; in fact, there's much less of it. The solution is to go into
the View menu, go to zoom, and in the sub-menu, press enter on normal.
There's also a shortcut to switch to normal zoom, control plus f10.
For some reason zoom sometimes gets set to something else, which seems
to cause the brief phrases. I haven't a clue what triggers it.
Mary
