[st-and.crc] Re: Sanding SBC

  • From: julie hardisty <juliehardisty@xxxxxxxxxxx>
  • To: "claytonhardisty@xxxxxxxxxxx" <claytonhardisty@xxxxxxxxxxx>
  • Date: Fri, 21 Oct 2016 17:44:48 +0000

Hi ,

I can help, Sunday after the sprints pack up , Monday and Wednesday evening 
from 6pm . Low plank ! 

Regards 

Julie 



Sent from my iPad

On 21 Oct 2016, at 14:49, clayton hardisty <claytonhardisty@xxxxxxxxxxx> 
wrote:

Thanks to quite a few of the regulars ,the boat was easily turned last night 
and a good start was made on the sanding. I have in mind the hull of the 
Craster boat in terms of the quality of finish in the full knowledge that 
this is unlikely to be attainable due to its perfection. It remains however 
our direction of movement, no lumps bumps or holes or runs.
The bow of the boat is nearest the door as you walk in to the garage which 
makes the side on the left the port side as the boat is upside-down. The 
planks are numbered from the keel down 1,2 etc.At this point sanding needs to 
be methodical and thorough wether by hand or with a sander. Chose a plank or 
share a plank and sand down its length.if a plank is finished please note 
that on the work sheet on the right. If its half finished, note which end you 
started. A sanded plank should have no evidence of brush marks or ripples, 
only the scratches and other damage , it should feel smooth. If you are short 
, do a low plank.
For those with more than sanding skills, any exposed wood should be skimmed 
evenly with the paint which has arrived as an undercoat. For those used to 
resins and fillers feel free to mend the damage in a methodical fashion. I 
would hope the sanding is finished by thursday and paint can be applied.
Volunteers. 
Rowing is the activity that can occur only after a boat has been built and 
only if it is properly maintained. Please lend the club your elbow for an 
hour or three this week.
The garage can be accessed at any time. All the committee members have keys 
and Steve lives opposite. I think for ease of communication and to involve as 
many as possible , anyone who is free should use this thread. I don’t mind 
the email being busy for a week.
Get involved Clayton�wk��,
����Q���)nmg��+^��i��0��Z�����(j�Z��0�x��� ��V�y�(�m����
iǛ���o쵧(j�Z��0�x����Y��Ơzƫy�܆+�v)��l��0���zX���+���r�{�-jw\��b�+E�狊�l���ס��l��0���zX���+��b��쵩�r�-��Z����칻�*m���˛���m�+�����*'b��jv���h�)݊���\���-��b��az����z�az������隊[�٨n)^�'z{�m��N���Zvh�zf���&��嵩d��d�
J�'v�����j�Z�0�x���y�"��m����
,��ݭ�,r����k����nn���O�iǛ��!��l��0���y�(��&��Zr����k����nl    
e��,j�j����b��b�m���� �祊�l��?j�!����֧u��V+"�Z�x����nȭzm����
�祊�l��?�+-��Z��+r����{*.�˛����ب��칻�&ޢ�Z���q�b�v(�Ƨj[(��"�ثy�e�)���^�+-��y�ݱ稶����z������ݚ����a�w��fޮ��zX���f�w�j)m�i^n[Z�KZ�I�

Other related posts: