[ssug-malappuram] Re: [MES-FSUG] Re: Towards a Hack CAMP on Project GNU Radio.
- From: Musfir Mohammed <mohammed.musfir@xxxxxxxx>
- To: mes-fsug@xxxxxxxxxxxxxxxx
- Date: Mon, 2 Apr 2012 18:45:03 +0530
I am proposing a sprint type event on this which would call for the
introduction of the GNU RADIO and related projects and also a contribution
initiation to the same. I am sure our college (in fact all the engineering
colleges) have ample resources required in this direction. Only that
proper cancelling of the same is required.
Please do respond to this proposal with your constructive ideas and views.
Thus we can dedicate or leave behind a trail of this work to the coming
generation of engineers.
On Sun, Apr 1, 2012 at 9:33 AM, Nithin Kamal A <myfaithnka@xxxxxxxxx> wrote:
>
> hi all,
>
> hope this will help you,
> http://groups.yahoo.com/group/softrock40/
>
> nithin
>
>
> On Fri, Mar 30, 2012 at 5:55 AM, Musfir Mohammed <mohammed.musfir@xxxxxxxx
> > wrote:
>
>> We have tried a few steps on building a small block as per the link above
>>
>> http://gnuradio.org/redmine/projects/gnuradio/wiki/BlocksCodingGuide
>> *
>> *
>> It would be very helpful if any familiarized person could guide us forth
>> on this aspect. Once we are into it I am sure there would be wonders. The
>> power of SDR is still doubted by a lot many of the enthusiasts which I
>> believe can be unleashed only by an exclusive indulgence into the
>> development.
>>
>>
>> On Fri, Mar 30, 2012 at 1:17 AM, Nithin Kamal A <myfaithnka@xxxxxxxxx>wrote:
>>
>>> Hi all,
>>> I am an open source hardware enthusiast, I have worked on an AM radio
>>> defined inside arduino.
>>> I believe this link will help,
>>>
>>> www.leaflabs.com/devices/maple/
>>>
>>> There is no restrictions for software here,because what we tell is what
>>> it does,but there is no 100 percent software based radio also,all primary
>>> stages will require specialised hardware because the DSP requires an High
>>> clock speed and enough bandwidth.
>>>
>>> SDR is quite popular among HAM enthusiasts because DSP in 8 bits ADC is
>>> enough for VLF operations,and a clock speed of 16 or 32 MHZ will work
>>> smoothly.
>>>
>>> But coming in to Citizen Band, Conventional DSBSC mode is possiple, but
>>> FM de-modulalation requires a High cost board like I mentioned above.
>>>
>>> Nithin Kamal A
>>>
>>>
>>>
>>> On Wed, Mar 28, 2012 at 7:40 PM, raghesh <raghesh.a@xxxxxxxxx> wrote:
>>>
>>>> Having looked into the project last two days with Musfir and Sajith
>>>> Sir, it seems this is a quite interesting project where students can
>>>> make contribution. We have already seen some areas to be understood
>>>> and to be explored. The hack camp suggested by Musfir would be a great
>>>> start in that direction.
>>>>
>>>> Regards,
>>>> On Wed, Mar 28, 2012 at 6:37 PM, Musfir Mohammed
>>>> <mohammed.musfir@xxxxxxxx> wrote:
>>>> > Hi all
>>>> >
>>>> > It is long since we had any noise from MES FSUG. Being a student of
>>>> ECE I
>>>> > happened to use a couple of Simulation tools and Softwares of which
>>>> are
>>>> > Simulink, Labview etc. I happened to come across a very useful and
>>>> wonderful
>>>> > tool called GNU RADIO which comes under the Software Defined radio
>>>> project,
>>>> > ( http://en.wikipedia.org/wiki/Software-defined_radio ) attending a
>>>> workshop
>>>> > at Amrita, Coimbatore. Rakesh sir whom I have copied is one person
>>>> who has
>>>> > much idea on this.
>>>> >
>>>> > http://gnuradio.org/redmine/projects/gnuradio/wiki
>>>> >
>>>> > The above tool is far different from the current simulation tools as
>>>> it
>>>> > calls for a replacement of many of the bulky and expensive hardware
>>>> in the
>>>> > form of a software and a PC
>>>> > The tool allows us to add custom blocks into the existing system thus
>>>> > enhancing its scope and utiility
>>>> > An example of a project is using GNURADIO is the open BTS
>>>> > project http://openbts.sourceforge.net/
>>>> >
>>>> > It would be of great impact to the students here if we could try to
>>>> get into
>>>> > the contribution of new blocks by using python code so that we can
>>>> implement
>>>> > various useful tools like the whose source code is available to us.
>>>> The
>>>> > signal processing blocks of the existing system are written in C++
>>>> and work
>>>> > on Python.
>>>> >
>>>> > Some of the members here have tried out to solve this problem here. I
>>>> think
>>>> > it would be virtuous for us as well as the future batches to
>>>> introduce them
>>>> > to this venture. As part of this I would like to propose an idea of a
>>>> > BLOCKSET Creation camp whereby we could try out building some
>>>> prototype in
>>>> > Python so that we could mobilize the venture.
>>>> >
>>>> > Every piece of contribution is valuable in this venture as it is a
>>>> promising
>>>> > solution to the grave scenario that exists today. Lack of proper
>>>> tools for
>>>> > educational and industrial purposes at economically viable condition.
>>>> >
>>>> > This project calls for people of expertise in Electronics and
>>>> Communication
>>>> > engineering and Computer Science. Kindly look into this matter and
>>>> put forth
>>>> > your suggestion.
>>>> >
>>>> >
>>>> > --
>>>> > Thanking You
>>>> > Musfir Mohammed
>>>> > Department of ECE
>>>> > 8th Semester
>>>> > MES College of Engineering
>>>> >
>>>> > Member | IEEE : 90735154
>>>> >
>>>> >
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Raghesh
>>>>
>>>> --
>>>> You received this message because you are subscribed to the "MES-FSUG"
>>>> group.
>>>> To post to this group, send email to mes-fsug@xxxxxxxxxxxxxxxx
>>>> To unsubscribe from this group, send email to
>>>> mes-fsug-unsubscribe@xxxxxxxxxxxxxxxx
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/mes-fsug?hl=en
>>>>
>>>> Our IRC channel #mes-fsug at irc.freenode.net. Webpage for GNULabs @
>>>> MESCE is at http://gnulabs.org/mesce/
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the "MES-FSUG"
>>> group.
>>> To post to this group, send email to mes-fsug@xxxxxxxxxxxxxxxx
>>> To unsubscribe from this group, send email to
>>> mes-fsug-unsubscribe@xxxxxxxxxxxxxxxx
>>> For more options, visit this group at
>>> http://groups.google.com/group/mes-fsug?hl=en
>>>
>>> Our IRC channel #mes-fsug at irc.freenode.net. Webpage for GNULabs @
>>> MESCE is at http://gnulabs.org/mesce/
>>>
>>
>>
>>
>> --
>> Musfir Mohammed
>> Department of ECE
>> 7th Semester
>> MES College of Engineering
>>
>> Member | IEEE : 90735154
>>
>>
>>
>> --
>> You received this message because you are subscribed to the "MES-FSUG"
>> group.
>> To post to this group, send email to mes-fsug@xxxxxxxxxxxxxxxx
>> To unsubscribe from this group, send email to
>> mes-fsug-unsubscribe@xxxxxxxxxxxxxxxx
>> For more options, visit this group at
>> http://groups.google.com/group/mes-fsug?hl=en
>>
>> Our IRC channel #mes-fsug at irc.freenode.net. Webpage for GNULabs @
>> MESCE is at http://gnulabs.org/mesce/
>>
>
> --
> You received this message because you are subscribed to the "MES-FSUG"
> group.
> To post to this group, send email to mes-fsug@xxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to
> mes-fsug-unsubscribe@xxxxxxxxxxxxxxxx
> For more options, visit this group at
> http://groups.google.com/group/mes-fsug?hl=en
>
> Our IRC channel #mes-fsug at irc.freenode.net. Webpage for GNULabs @
> MESCE is at http://gnulabs.org/mesce/
>
--
Musfir Mohammed
Department of ECE
7th Semester
MES College of Engineering
Member | IEEE : 90735154
--
You received this message because you are subscribed to the "MES-FSUG" group.
To post to this group, send email to mes-fsug@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to
mes-fsug-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at
http://groups.google.com/group/mes-fsug?hl=en
Our IRC channel #mes-fsug at irc.freenode.net. Webpage for GNULabs @ MESCE is
at http://gnulabs.org/mesce/
Other related posts:
