[slackintosh-users] Re: Installation on G3-Yosemite with CMD646 rev.1

From: Adrian Ulrich <adrian@xxxxxxxxxxxxxxxx>
To: slackintosh-users@xxxxxxxxxxxxx
Date: Tue, 24 Oct 2006 21:06:19 +0200

Hi,

> Startup and installation is only possible with 2.4 (alt1). After install 
> there is kernel 2.6 installed and so bootup is not possible! :(

alt1 is also 2.6 based.

Workaround:

 - Boot from cdrom
    -> at the yaboot prompt enter:
     alt1 root=/dev/hdaX (<- hdaX = your root partition)

 The system should now boot your installation

 - Mount the cdrom : eg /mnt/cdrom
 - copy /mnt/cdrom/boot/vmlinuxalt1 into /boot
 - edit /etc/yaboot.conf
 - run 'ybin -v'

 -> reboot



-- 
            A. Top posters
            Q. What's the most annoying thing on Usenet?

References:

[slackintosh-users] Installation on G3-Yosemite with CMD646 rev.1
From: Christian Kusserow

[slackintosh-users] Re: Installation on G3-Yosemite with CMD646 rev.1

Other related posts: