[slackintosh-users] Re: G3 Pizmo Airport card...
- From: Joost Kremers <joostkremers@xxxxxxxxxxx>
- To: slackintosh-users@xxxxxxxxxxxxx
- Date: Fri, 23 Dec 2005 11:05:03 +0100
On Fri, Dec 23, 2005 at 01:02:05AM -0500, Jon Grosshart wrote:
> Greets all. First, thanks for porting my favorite distro to PPC... :-)
> I'll try to be brief. My airport card is eth1 and I have to manually
> modprobe airport. inet1 doesn't seem to identify it. So I modprobe
> from the beginning of rc.inet1 (can't find a rc.modules anymore)...
then just create rc.modules and make it executable. rc.inet1 is not the
right place to load modules.
> airport, orinoco and hermes all get loaded.
> rc.pcmcia gives me a bunch of IO errors so I chmoded it to 644... I
you don't need rc.pcmcia for the airport card.
> set my rc.wireless.conf with my essid, mode and key. I filled in
> IPADDR,NETMASK and GATEWAY in rc.inet1.conf. I am using a Belkin
> router which works fine on my X86 laptop under Slackware. I can ping
> my router at [1]192.168.2.1 and I see the WLAN light flash everytime
> it gets pinged. I just can't get online. Not sure what to do from
> here.
ifconfig and route -n would be the first things to check.
--
Joost Kremers, PhD
Graduate College "Satzarten"
J.W. Goethe University, Frankfurt am Main
Varrentrappstrasse 40-42
60486 Frankfurt am Main
Germany
Tel. +49 69 798 28050
Other related posts:
